? on DR fitment on my FC
03-23-07, 02:02 PM
#1
Down for the count...
Thread Starter
iTrader: (7)
Join Date: Jan 2002
Location: Cincinnati, OH
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
? on DR fitment on my FC
Looking to get a set of Drag Radials for my FC. I will be putting them on FD wheels which are 16x8. My question is, can I fit a 255/50/16 in the Rear of the FC on stock suspension? I have also purchased a set of 25mm spacers to push the wheels out a bit.
The only other option i have for a DR on a 16in tire is the Nitto 555R's which come in a 245/50/16, which i know will fit great with the spacers.
I would rather stick to a bias-ply tire to make it easier on my drivetrain. MT ET Street Radials only come in a 255/50/16.
The only other option i have for a DR on a 16in tire is the Nitto 555R's which come in a 245/50/16, which i know will fit great with the spacers.
I would rather stick to a bias-ply tire to make it easier on my drivetrain. MT ET Street Radials only come in a 255/50/16.
03-23-07, 05:07 PM
#2
Senior Member
Join Date: Jun 2002
Location: S.A. Texas/Tokyo Japan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
26/10.5/16 Mt ET streets on a 8j wheel with 35offset. No spacers. Best 60ft so far is 1.54 Stock ride height
http://www.mickeythompsontires.com/s...?item=ETStreet
http://www.mickeythompsontires.com/s...?item=ETStreet
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
imitek
3rd Generation Specific (1993-2002)
3
09-22-15 11:29 PM
