Check out my car on GRS
05-10-10, 09:59 PM
#1
IRS Champion
Thread Starter
Check out my car on GRS
They did a nice write up with pics/video's...
Take a look:
http://grs-motorsports.net/forums/viewtopic.php?t=10194
Take a look:
http://grs-motorsports.net/forums/viewtopic.php?t=10194
05-11-10, 12:14 AM
#3
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
That's a nice write up. Here's a quick translation........
In recent years, Enzo Iadevaia in his little spare time to complete this project on its own workshop Enzo Racing in Long Island, New York. With plans to have the RX-7 with independent suspension on the planet faster, Enzo was in charge of all manufacturing, wiring and project schedule.
When you build the engine Enzo leave that job to Thunder Race Engines which chose a combination 13B Turbo and using alcohol as fuel. The injection system is scheduled Autronic SM4 Dyno Enzo himself where he finds a power output of +800 WHP.
Something I personally like the sport of acceleration is the diversity in it, and so when he Iadevaia the task of being the fastest independent suspension using 8.8 IRS in this case, a transfer clutch and a manual Liberty Assisted tires 26 " X 8.5 "in size and to finish the case without the help of" Wheelie Bars "weighing over 2,500 lbs Turbo II.
Plans are to be the IRS RX-7 faster and in the future may be the fastest import with 8.5 "rubber. To date, the best time of 9.003 seconds and Enzo are a "top speed" of 161 MPH Enzo Iadevaia would like to thank the support of its sponsors Thunder Race Engines, Driveshaft Shop, Bullseye Turbo and finally his Visa & Master Card.
In recent years, Enzo Iadevaia in his little spare time to complete this project on its own workshop Enzo Racing in Long Island, New York. With plans to have the RX-7 with independent suspension on the planet faster, Enzo was in charge of all manufacturing, wiring and project schedule.
When you build the engine Enzo leave that job to Thunder Race Engines which chose a combination 13B Turbo and using alcohol as fuel. The injection system is scheduled Autronic SM4 Dyno Enzo himself where he finds a power output of +800 WHP.
Something I personally like the sport of acceleration is the diversity in it, and so when he Iadevaia the task of being the fastest independent suspension using 8.8 IRS in this case, a transfer clutch and a manual Liberty Assisted tires 26 " X 8.5 "in size and to finish the case without the help of" Wheelie Bars "weighing over 2,500 lbs Turbo II.
Plans are to be the IRS RX-7 faster and in the future may be the fastest import with 8.5 "rubber. To date, the best time of 9.003 seconds and Enzo are a "top speed" of 161 MPH Enzo Iadevaia would like to thank the support of its sponsors Thunder Race Engines, Driveshaft Shop, Bullseye Turbo and finally his Visa & Master Card.
05-11-10, 05:10 AM
#5
pushing s##t up hill
with that mph it looks like you will have to go clutchless , i know with my own data logging its just taking too long to change gears, time wasted in my opinion, but then again i got a s4 box 
Good stuff mate, good luck for your future racing.
Good stuff mate, good luck for your future racing.
Trending Topics
05-11-10, 08:37 PM
#9
LOL, they said that enzo is a true PUERTO RICAN at heart. LOLOLOL
These guys are really backing up enzo and are super exited to see what this year brings.
timemachine also said that they are anxious to see what enzo will do because that will only make them work harder on better times and wish enzo the best and hope he hits the 8s soon.
These guys are really backing up enzo and are super exited to see what this year brings.
timemachine also said that they are anxious to see what enzo will do because that will only make them work harder on better times and wish enzo the best and hope he hits the 8s soon.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
