C4 auto box set up FOR SALE
#1
United Kingdom
Thread Starter
Join Date: Sep 2004
Location: United Kingdom
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
C4 auto box set up FOR SALE
I am now breaking my drag car project so everything is for sale. I am based in the UK so parts delivery to you guys could be expensive.
First off i have a complete C4 auto box set up for with starter, bell housing, box and converter from Tony Dominello. Tranny was built by the best...Andy Frost here in the UK. Billet valve body and other parts, custom mods to take the high revving 13b i had bolted to it. Using shot of gas and a compressed air system the car would launch at 6800-7000rpm, i would see full launch boost within a second so heads up racing was fine.
Would have it checked over by Andy prior to sale also
Email me at garygooding@btinternet.com
Thx
First off i have a complete C4 auto box set up for with starter, bell housing, box and converter from Tony Dominello. Tranny was built by the best...Andy Frost here in the UK. Billet valve body and other parts, custom mods to take the high revving 13b i had bolted to it. Using shot of gas and a compressed air system the car would launch at 6800-7000rpm, i would see full launch boost within a second so heads up racing was fine.
Would have it checked over by Andy prior to sale also
Email me at garygooding@btinternet.com
Thx
#3
United Kingdom
Thread Starter
Join Date: Sep 2004
Location: United Kingdom
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for late reply, don't manage to get on here that often.
Transmission has ran behind my 550bhp 13b and put in a 9.5@ 141 quarter.
Will come with -*
Gearbox with bellhousing
Flex plate
Converter
B&M Shifter
Starter
Prop to 9" if required
Gearbox spec is as follows -*
Full roller bearings throughout.
4 pinion Racetuf front planetary,
Maraging 300 26 spline input shaft.
Racetuf billet C ratio servo.
Kevlar intermediate band.
HD low band.
Racetuf billet transbrake*VB*with high rev regulator system.
Deep B+M oil pan with filter.
Shifter is this one -*
http://www.bmracing.com/products/808...&md=&smd=&eng=
All working fine when it was removed from car
Total for all parts is £2750..........postage I will need to check but I reckon around £400
Anything else you want to know please ask.
Rgds
Gary
Transmission has ran behind my 550bhp 13b and put in a 9.5@ 141 quarter.
Will come with -*
Gearbox with bellhousing
Flex plate
Converter
B&M Shifter
Starter
Prop to 9" if required
Gearbox spec is as follows -*
Full roller bearings throughout.
4 pinion Racetuf front planetary,
Maraging 300 26 spline input shaft.
Racetuf billet C ratio servo.
Kevlar intermediate band.
HD low band.
Racetuf billet transbrake*VB*with high rev regulator system.
Deep B+M oil pan with filter.
Shifter is this one -*
http://www.bmracing.com/products/808...&md=&smd=&eng=
All working fine when it was removed from car
Total for all parts is £2750..........postage I will need to check but I reckon around £400
Anything else you want to know please ask.
Rgds
Gary
Thread
Thread Starter
Forum
Replies
Last Post