6.97@197mph Sporty Motorsports 13B RX7
740 hp @ 28 psi
Joined: Jun 2006
Posts: 379
Likes: 0
From: MIAMI
VIDEO OF SECOND PASS THAT SAME NIGHT ONBOARD ,
TOO MUCH POWER
http://grs-motorsports.com/noticias/...rtyonboard.wmv
TOO MUCH POWER http://grs-motorsports.com/noticias/...rtyonboard.wmv
Banned. I got OWNED!!!
Joined: Dec 2007
Posts: 24
Likes: 0
From: Cacoon
The only magic of Microwreck is that we export it, while no one in its country of origin (with any level of inteligence) would waste their time with it.
Honestly
its a bad joke, like comparing an Amiga500 to a modern day PC 
But hey 
= zero technology in EFI to go fast, just look at top fuel
Banned. I got OWNED!!!
Joined: Dec 2007
Posts: 24
Likes: 0
From: Cacoon
LOL
Drag racing is not for the smartest types in the world ONLY the loudest and least talented from what I have seen.
I dont see Mazdaspeed winning LeMans 24 hour running microwreak?
I dont see ANY decent rotary track cars in ANY series running microwreak?
I dont see ANY non rotary cars winning ANY top level championships in ANY country with microwreak?
^^^ Why???? cause they are rubbish at the end of the day, only realy targeted at the hobby types and ammeture racers with little ability & skilz, who know no better, or have very simple basic applications like full throttle 1/4 mile where a carby will do the job. I dont know of any serious playerz who would touch that stuff, not a single one.
They are a hobby ghetto level joke in this country, only used by the lowest of the low, where profits and little effort is highest priority on the table. Its prooven you can use a piece of **** (technology and function wise) to do a fast 1/4 mile, that does not mean that piece of **** is gold, let alone gold plated as you hype it up to be
Keep it real dude, they are a two bit nobody ECU maker with a very very average product, pretty much the laughing stock of the Australian scene and its only popular amoung simple people both inteligence wise and tallent wise (or ones who are only focused on profit above function!) at the end of the day. You can put a #1 on your advertising if your paranoid about being so average as they are
Drag racing is not for the smartest types in the world ONLY the loudest and least talented from what I have seen.
I dont see Mazdaspeed winning LeMans 24 hour running microwreak?
I dont see ANY decent rotary track cars in ANY series running microwreak?
I dont see ANY non rotary cars winning ANY top level championships in ANY country with microwreak?
^^^ Why???? cause they are rubbish at the end of the day, only realy targeted at the hobby types and ammeture racers with little ability & skilz, who know no better, or have very simple basic applications like full throttle 1/4 mile where a carby will do the job. I dont know of any serious playerz who would touch that stuff, not a single one.
They are a hobby ghetto level joke in this country, only used by the lowest of the low, where profits and little effort is highest priority on the table. Its prooven you can use a piece of **** (technology and function wise) to do a fast 1/4 mile, that does not mean that piece of **** is gold, let alone gold plated as you hype it up to be
Keep it real dude, they are a two bit nobody ECU maker with a very very average product, pretty much the laughing stock of the Australian scene and its only popular amoung simple people both inteligence wise and tallent wise (or ones who are only focused on profit above function!) at the end of the day. You can put a #1 on your advertising if your paranoid about being so average as they are
i seen the engine and i know that its not a PP and its not build by any australian company,when the car first came out a couple of years ago the car ran a PP motor
turbo intercooler then they change the combination to a semi PP with meth reaching around 980 hp(there its a video around with the dyno pulls and you can see the motor)then a couple of weeks ago they change the turbo sistem and the entire intake setup in order to reach the 6 second barrier
turbo intercooler then they change the combination to a semi PP with meth reaching around 980 hp(there its a video around with the dyno pulls and you can see the motor)then a couple of weeks ago they change the turbo sistem and the entire intake setup in order to reach the 6 second barrier
Thread Starter
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Anonther camera angle of the record setting run compliments GRS Motorsports..
http://grs-motorsports.com/noticias/...ic/sporty2.wmv
http://grs-motorsports.com/noticias/...ic/sporty2.wmv
Wow... 1100 hp out of 80 cubic inches. Amazing, and congrats. Anyone have any idea on how many runs they get out of an engine at that power level?
Also, love the 7s in the ET and mph! Divine intervention courtesy of Felix I'm sure
Anyone know what turbo and boost level he's running to put down 1100 hp? Also interested to know his vehicle weight.
Also, love the 7s in the ET and mph! Divine intervention courtesy of Felix I'm sure
Anyone know what turbo and boost level he's running to put down 1100 hp? Also interested to know his vehicle weight.
Last edited by RCCAZ 1; Dec 7, 2007 at 01:50 PM.
