104 Sunoco advance timing IGL/IGT over 93
12-31-06, 11:59 AM
#1
boxed in and drawn out
Thread Starter
Join Date: Dec 2003
Location: Bayouself
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
104 Sunoco advance timing IGL/IGT over 93
Well my three bar is on. Set a published offset in the datalogit. (not calibrated to verify, its close) I have the boost timing @ 15 on 15 psi with 14 @ 17psi up to 20 with a split of 12.
I was wondering how much advance I can change my 93 base map lower boost IGL up to the 15 psi.
I read one to two degree advanced across my IGL /IGT maps because of the higher octane Sunoco.
My knock is down and high 10's AFR from 16-20 PSI but below 15psi the car sounds smooth but lost a little something. (need advance?)
Are the 9's(plugs) all the way around too hot a plug also? This is for daily use and some track.
Thanks
I was wondering how much advance I can change my 93 base map lower boost IGL up to the 15 psi.
I read one to two degree advanced across my IGL /IGT maps because of the higher octane Sunoco.
My knock is down and high 10's AFR from 16-20 PSI but below 15psi the car sounds smooth but lost a little something. (need advance?)
Are the 9's(plugs) all the way around too hot a plug also? This is for daily use and some track.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM