Yaw power already has a Renesis on the dyno!
It appears that Paul Yaw is building a supercharged RX-8 to race. This should be pretty cool when its done. They are currently dyno testing the engine and setting a horspower goal of 450! Here it is on the engine dyno.
http://personal.riverusers.com/~yawpower/renespic.html |
bastages! i want that
mike |
kewl!
|
This is where the RX8 will start to get interesting ... a new motor to play with !
|
Kick ass! Can't wait to see the results. I wonder if when we'll start to see aftermarket FI kits for the RX-8.
|
do they make superchargers for FC NA's? does anyone on the forum have one?
|
Damn damn DAMN!!!! I want one of those motors to play with!!!!
|
Originally posted by TurboFD do they make superchargers for FC NA's? does anyone on the forum have one? |
:bigthumb:
i haev see 2 on the streets already! :D (not supercharged obviously) |
I haven't even seen one, but I wanna hand one it's ass just to show it whose boss.
Thats awesome that someone is already working on race applications for the Renesis though, maybe with a big enough following, we'll see a new 7! |
Originally posted by 911GT2 I haven't even seen one, but I wanna hand one it's ass just to show it whose boss. |
stock for stock.
FD vs Rx-8 it would be a close match on the 1/4 mile. |
I thought the RX8 was at least 1 second slower
|
The 8 would be a little slower but considering it is basically the same motor without turbos it is very impressive. When Paul gets a supercharger on this motor it is going to make some jaws drop I can assure you.
|
:rock::rock::rock:
|
Its nice to know that the bolt pattern is the same..... but that was prolly a given anyway.
|
someone on the rx8 forum recently dynoed their 6spd rx8 at Pettit. It put down a mere 173rwhp. It will be interesting to see if Yaw power gets any closer to the factory claimed output (maybe the rx8 just has drivetrain loss of 30%???? ).
|
Has anyone thought about side/peripheral exhaust and if its even possible?
|
Originally posted by CCarlisi someone on the rx8 forum recently dynoed their 6spd rx8 at Pettit. It put down a mere 173rwhp. It will be interesting to see if Yaw power gets any closer to the factory claimed output (maybe the rx8 just has drivetrain loss of 30%???? ). |
Originally posted by MikeLMR :eek: I hope they were fom japan otherwise thats a very new motor to be putting on a dyno ! |
According to the owner it had over 600 miles on it.
|
http://www.rx8forum.com/showthread.p...5&pagenumber=1
He is supposed to post the sheet this weekend. |
I agree, you can break in a motor extremely quickly if you really want to. One day is all it takes :)...2 just for kicks :D. Btw guys...his car is AUTO so no fear...the power is SPOT ON. Remember the auto cars only have 210bhp not 247. So 173 is a good power number. Oh wait...now he's saying he has a manual tranny (I'm guessing 5spd...no matter how you take it he can't have a 247 engine that puts down only 173). He hasn't shown pics of the car OR the dyno so I'm getting very skeptical... :confused:
|
The manual is a 6 spd
|
Originally posted by Cheers! stock for stock. FD vs Rx-8 it would be a close match on the 1/4 mile. |
All times are GMT -5. The time now is 06:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands