so after installing mine and getting it working there is one little thing that I'm having a problem with, and I'm curious if other people are having the same problem. my waring for the boost level resets everytime I shut the car off. it's wierd, I'll try to explain this the best I can so stay with me. my warning level is set at 11psi, but every time I shut the car off it's like it resets or somthing. basically I'll start the car and start driving down the road and the warning will start flashing at me at me around 8psi, but when I go check to see what the warning is set at it says 11psi. so I hit the set (push the dial **** to set it) and everything is fine, no more flashing warning at 8psi. but when i shut the car off then start it again I have to reset it or it flashes at me around 8psi again. I've talked to greddy about this and they've never heard of a problem like this and told me to take it back to where I got it and they will send it in for warrenty or somthing like that, problem is I got it off ebay so i can't exactly take it back. just wanted to know if anyone else has had this problem with theres and what they did to fix it.

 

Hi m8 i have profec E and mine did the same, I solved my problem by saving all my alterations to the main computer and raising the safety boost cut off lvl too 1.2KG.

you also have to do a few runs to AUTO P it ( I did anyways with the profec e manage).


the boost lvl wont have anything to do with it but I found that every time i exceeded 1kg it resetted to .75 kg all the time thats the only reason I raised my safety cut off lvl (if you alter this its at your own risk IM NOT A PROFFESIONAL at this im a begginer, so please dont blame me for any problems afterwards )


try saving first ( with my system i have to save after every little adjustment for it to take effect )