Rotary Car Performance General Rotary Car and Engine modification discussions.

water injection/ spark plugs

Thread Tools
 
Search this Thread
 
Old Dec 14, 2006 | 10:05 AM
  #1  
chuck8313BTSDS's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 420
Likes: 0
From: S.A. Texas/Tokyo Japan
water injection/ spark plugs



After 7 75% throttle 1/8 mile passes. 91mph on 195 street tires. These are the plugs I started the new/rebuild motor on and they were used. Motor has 1 hour run time. Boost was .9bar. EGT was 675c. AFR was low 11s and total timing was 20deg. Never went over 8000rpms. Two M5 water nozzles that start to come on at 2psi and go full by 25psi with a 150psi pump. Plugs are 9s.

your opinion on the plugs, please. thank you.
chuck
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM
Joe428
1st Generation Specific (1979-1985)
16
Aug 19, 2015 06:24 PM




All times are GMT -5. The time now is 02:36 PM.