I have searched on and off now for a couple days and have turned up no hard results.

Is there anyone that makes a t56 bellhousing adapter for a 13b/20b?
if so can you post some contact info.
(no the t5 will not work)

Second question is there anyone that has made a custom input shaft for the tranny so the spline count/size matches up to the 13b/20b. Stock length or not, im looking for a machine shop that has alreay done this to save money on the cad work required. I would prefer a custom unit and not machining the stock input shaft for the t56. I would prefer the same spline counts so that i could use an aftermarket fd clutch.

 

Look in the 20B forum. IIRC, someone posted the name of a company that makes an adaptor about a year ago.

 

Kennedy Engineering:

http://www.kennedyeng.com/other.htm

 

Kennedy only makes t5 adapters and i even emailed them.
they do not do t56 adapters.


And the bolt patterns are not the same

 

when you find out, let me know.
i'm down

 

i will do that
and when i do get it done in a while i will let everyone know how it went

 

call up g force transmissions they make them. I have it in my car, its a chevy bellhousing with the hole made for a fd starter. it comes with a mid plate also. They made the input shaft for me also.