Shurflow vs Aquamist
#1
Rotary Freak
Thread Starter
Join Date: Nov 2001
Location: trinidad and tobago
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
Shurflow vs Aquamist
One of my Aquamist pumps died and I need to replace it , I use two because I put together a fairly high flow system, anyway , I recently came across the Shurflow pumps (looking at the "do it yourself" kits) and it seems that one of those can outperform my two Aquamist pumps !! . Anyone using these pumps ? , how good are they ? , do they actually work as good as they say ? , and the price is QUITE a lot cheaper than the Aqua. !! , by the way anyone know if the pump in the pic is actually a Shurflo pump , I already bought it for $40.00 , its rated at 2 gpm and 220psi !! ? , thanks.
#2
Rotary Freak
Thread Starter
Join Date: Nov 2001
Location: trinidad and tobago
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
http://www.nopistons.com/forums/inde...ST&f=3&t=42475
Damn forum wont let me put up the pic , you'll can find it at the above link.
Damn forum wont let me put up the pic , you'll can find it at the above link.
#3
FD3SW211E55
iTrader: (1)
Try going here and searching on "shurflo"
http://waterinjection.info/phpBB2/
I don't know whether anything there will directly answer your questions, but it's a starting point.
http://waterinjection.info/phpBB2/
I don't know whether anything there will directly answer your questions, but it's a starting point.
#6
Rotary Freak
Thread Starter
Join Date: Nov 2001
Location: trinidad and tobago
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by artowar
Doh! I see that you're already active on that Forum. Well, it looks like you'll be breaking new ground. Make sure to let us know how the ShurFlo works out.
Doh! I see that you're already active on that Forum. Well, it looks like you'll be breaking new ground. Make sure to let us know how the ShurFlo works out.
Thread
Thread Starter
Forum
Replies
Last Post