Problem
#1
Full Member
Thread Starter
Join Date: Mar 2006
Location: Espaņa
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Problem
I have a problem.
My car fails to 7.000rpm.
It cuts 7.000rpm Later it continues well.
??????
Mazda rx-7 fd,,,year 1995.
MOD..line of escape and filter
My car fails to 7.000rpm.
It cuts 7.000rpm Later it continues well.
??????
Mazda rx-7 fd,,,year 1995.
MOD..line of escape and filter
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
It could be many different causes.
It could be a worn out fuel pump or a clogged fuel filter.
I was recently getting a high power fuel cut, that was caused by a worn out air flow meter.
I drilled an access hole & cleaned the contacts and resistors on the inside position sensor circuit board.
That helped for a few weeks.
Then I started to get a high power miss-fire.
I cleaned the AFM circuit board again, and it only became worse.
A new AFM fixed it completely.
It could be a worn out fuel pump or a clogged fuel filter.
I was recently getting a high power fuel cut, that was caused by a worn out air flow meter.
I drilled an access hole & cleaned the contacts and resistors on the inside position sensor circuit board.
That helped for a few weeks.
Then I started to get a high power miss-fire.
I cleaned the AFM circuit board again, and it only became worse.
A new AFM fixed it completely.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM