paralleling turbos solenoid removal
#1
Man who sold his 7
Thread Starter
Join Date: Sep 2001
Location: Mechanicville, NY
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
paralleling turbos solenoid removal
okay, soon (I hope) I shall be paralleling the turbos, adding a power fc profec b, mid pipe and stuff and I want to remove all of the unneeded vacuum hoses and solenoids I'm not worried about emissions and what not so what solenoids and vacuum hoses may I remove?
Thanks
Thanks
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
You could actually remove all of them!
Non-seq/parallel does not use the pre-control acuator and solenoid, nor the turbo control's and charge control's.
If using an external boost control system like Profect, get rid of the boost control solenoid.
If removing the air pump, all parts of the secondary air injection system can be removed.
The fuel pump solenoid is also not needed.
Pull out the fuel vapor purge system.
The only one you will need is the secondary throttle control solenoid if you have not pulled that out, and want it to operate.
Non-seq/parallel does not use the pre-control acuator and solenoid, nor the turbo control's and charge control's.
If using an external boost control system like Profect, get rid of the boost control solenoid.
If removing the air pump, all parts of the secondary air injection system can be removed.
The fuel pump solenoid is also not needed.
Pull out the fuel vapor purge system.
The only one you will need is the secondary throttle control solenoid if you have not pulled that out, and want it to operate.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM