This thread has been around for a long time now, I just told someone local about it and he posted in this thread.

If the mod would make this a sticky then anyone will be able to find it.

RX7_Nut you are the man!!! Can you post the bits that you used if possible? I am tearing apart a 12a and with all the info you provided Iam going to bridge it! MODS PLEASE MAKE THIS A STICKY!!!

You are welcome, Yes MODS PLEASE MAKE THIS A STICKY


Here are the bits

http://i19.photobucket.com/albums/b1...h_Stuff422.jpg
http://i19.photobucket.com/albums/b1...h_Stuff418.jpg
http://i19.photobucket.com/albums/b1...h_Stuff408.jpg
http://i19.photobucket.com/albums/b1...h_Stuff326.jpg
http://i19.photobucket.com/albums/b1...h_Stuff320.jpg

hehe, dig the pic of the hand drill. Pretty crude but I guess it gets the job done if you have steady hands.

good stuff!

very good thread keep it going

I have ben looking for somthing like this for a long time. Thanks (now to find some scrap housings and iron's to practice before the FD goes under the knife).

Reviving thread because it's golden.

Yep it is a good info spot.

Why haven't they made this a sticky yet? maybe clean up the useless posts like this one.

Do the mods not want the porting secrets to get out?

While the pics are high quality the work isn't.

I agree with the above post . I don't see much usefullness especially with the work thats been shown, the only usefullness I'd see others getting from this is the experts answers and advice. Probly why this isnt a sticky and shouldnt need to be.

~Mike.........

it is not meant to be the ultimate professional porting thread. it is a very good thread. it shows how to get started in building your skills in porting. he is giving you a head start in getting the bits that are needed, which is a big help. i will add also that cratex works great for polishing metal. it should be a sticky but the advertisers won't allow it, it is all about the money.

Just remember on the polishing of the intake ports that you DON'T do a mirror finish, because that will overall decree the flow.

Same reason that a golf ball has dents in it.

But that Cratex is good stuff

How exactly does not making this thread a sticky benefit the 'advertisers' ?

because if everybody does there own porting they won't have to use some of the people that advertise here.

do those people advertise on nopistons.com?

i don't go to nopistons.com so i don't know who advertises there. i know you are only 23 years old but you will learn that it is all about money with everything in life.

way to use my age as an indicator of what I know...and thanks for the life advise...

All right lets not clutter this thread up. Keep on topic please

i can see you already know everything there is to know so i won't say anything else. way to learn.

Great thread, gives me the motivation to screw up my spare S4 TII!! :score:

STICKY!!!!

Nice writeup.

Good enough!!

What is the minimun size air compressor I could get away with for porting? I dont have alot of room in my garage so I will be trying it out in my basement. Thanks In Advance