nyknowledge

Hello
I just purchased a 93 bone stock rx7. She has 74k on the odometer. I bought her to modify but reading up on these cars they seem to blow up if heavily moded and dont usually get much past a 100k without a rebuild. Anyway im not much up on rotary engine's or turbo's for that matter. I have built a 677rwhp saleen and a bmw m5 and such but need help on this.
Basically im looking to get between 300-350 reliable RWHP. Which should not be that hard. This is what i have come up with please give me any input of what else I may need
exhaust,downpipe,intake,ecu,intercooler,header
again I want the car to drive as close to stock as possible and be reliable so I dont need to run crazy boost I was thinking maybe 12psi. Also would the clutch need upgrading
Thanks for your help and if anyone know's of a place that offers good package deals on these parts please leave the link.

silver_7

upgraded clutch, injectors, you could opt for a small single turbo( gets rid of all the vacuum and boost line crap) No headers on the 7 by the way. Larger fuel pump, bigger radiator...I might be missing some stuff but Im sure someone else will fill the rest in.

Mahjik

iTrader: (1)

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/

RandomHero

iTrader: (2)

you can make 300whp on the stock twins w/15psi a front mount and engine management.

Mahjik

iTrader: (1)

If you only make 300whp at 15 PSI on the stock twins, there is a serious problem with the car.