RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Rotary Car Performance (https://www.rx7club.com/rotary-car-performance-77/)
-   -   New Drag Times Thread (https://www.rx7club.com/rotary-car-performance-77/new-drag-times-thread-56980/)

Greg 02-25-02 07:40 AM

New Drag Times Thread
 
Well guys, its a new import drag season so there will definately be some new times out there. Post your times and car info here like in the old drag times thread in this format:) :) I am excited about this season! Please Use this format.

R/T
60'
330
1/8
MPH
1000'
1/4
MPH


Altitude (if known)

Modifications


Happy Legal Racing :D

TEDDER1 03-01-02 08:05 PM

analyze away...
 
R/T 1.375
60' 1.985
330 5.460
1/8 8.379
MPH 85.002
1000' 10.804
1/4 13.116
MPH 95.279 let off-didnt know where line was...

93 touring
Modifications
APEXi power intake, APEXi dual N1, ? downpipe, full interior, bald firestone tires (sparking metal bands)225/50/16s, full tank of gas. launched at 2000-2500 rpms.

what could this be if i didnt suck?

Jettison 03-03-02 10:45 PM

this 94 touring has only down pipe and mid pipe. I have the cat back system but not going to put it on till i have control of the fuel. it has stock cat back now.

this is all the times for today. this is my 1st time raceing aswell so RT sorda suck.
03/02/02
1/8 mile times.

1st: RT: .079 60ft: 2.097 ET: 9.104 MPH: 78.935
2nd: RT: .055 60ft: 2.171 ET: 9.124 MPH: 80.001
3rd: RT: .228 60ft: 2.417 ET: 9.585 MPH: 77.177
4th: RT: .095 60ft: 2.230 ET: 9.244 MPH: 79.465
5th: RT: .220 60ft: 2.283 ET: 9.265 MPH: 79.758
6th: RT: .096 60ft: 2.159 ET:9.247 MPH: 78.037
7th: RT: .634 60ft: 2.45 ET: 9.432 MPH: 79.689

well these are the times and they can only get better. I am going to do a few more mods soon and get it in the 8's. I will let you auto owners know how the tranny holds up

CYM TKT 03-10-02 10:04 AM

R/T:.992
60':2.106
330:5.823
1/8:8.791
MPH:84.75
1000:11.283
1/4:13.393
MPH:107.44

on slipping clutch/street tires and I found out I had a blown side seal the next day.

LETHAL RX7 03-10-02 09:08 PM

R/T .567
60' 1.737
330' 4.912
1/8 7.577
MPH 92.75
1000 9.852
1/4 11.786
MPH 115.33

This was at cecil county this weekend..at 13 psi. I tried running 3rd gear out to see if i could go through the traps in 3rd but it poped the limiter so i had to put it in 4th..and they said that was my first and last run bc i dont have a cage YET. It was a good base run for the car. I have run 117 before so i contribute that to the 3rd gear thing..but i am pleased bc i know the car will go much faster...next is the cage then a tank of c16 and 18 psi and we will se what she can do...i have a t78 street ported..all that good stuff

Bruno 03-17-02 10:56 PM

R/T 0.555
1/8 7.84

Greg 03-18-02 06:41 PM


Originally posted by LETHAL RX7
R/T .567
60' 1.737
330' 4.912
1/8 7.577
MPH 92.75
1000 9.852
1/4 11.786
MPH 115.33

This was at cecil county this weekend..at 13 psi. I tried running 3rd gear out to see if i could go through the traps in 3rd but it poped the limiter so i had to put it in 4th..and they said that was my first and last run bc i dont have a cage YET. It was a good base run for the car. I have run 117 before so i contribute that to the 3rd gear thing..but i am pleased bc i know the car will go much faster...next is the cage then a tank of c16 and 18 psi and we will se what she can do...i have a t78 street ported..all that good stuff

Thats excellent! Are you the White FD thats at cecil every now and then?

turborotarypower 03-23-02 11:55 AM

1st run on TII
 
here is the timeslip let me know what you think!

Greg 03-23-02 01:22 PM

I need to get to work!!!

BTW, I know someone with a 1st gen for sale, its pretty decent

LETHAL RX7 03-24-02 12:03 AM

Im not the white one..mine is red..stock mainly ex.. the big polished fmic and enkeis..but once the cage is in youll see me im sure...peace

Slammedblk7 03-25-02 09:50 AM

R/T 1.034
60' 2.342
330 6.627
1/8 10.170
MPH 68.81

1990 GXL STOCK/w CONE FILTER....

turborotarypower 03-25-02 06:06 PM


Originally posted by Greg
I need to get to work!!!

BTW, I know someone with a 1st gen for sale, its pretty decent


greg aim me when you get a chance.

SAGE 03-28-02 10:41 AM

R/T:.882
60':2.109
330:5.988
1/8:9.021
MPH:81.42
1000:11.628
1/4:13.840
MPH:101.89

Apex Power intake, DP, CB, Hi Flow cat, Bonez Street Comp Cluch, The worst cause of tire rot in the world and the syncros on the tranny are messing up on me in 2nd and in 4th :(

Dr Wankel 03-28-02 04:05 PM

This is my best to date:

R/T.............1.306
60'.............2.276
330............5.868
1/8.............8.861
MPH...........83.54
1000'.........11.395
1/4.............13.54
MPH...........105.68

Mods: At the time of this run, I only had a DP and the PFC. Now there is quite a bit more. The track opens back up next week so we'll see what happens.

DarkKnight 04-02-02 08:38 AM

I just ran this at Cecil on Friday night

R/T.....913
60'.....2.136
330'...5.738
1/8.....8.689
MPH....84.32
1000..11.228
1/4.....13.368
MPH....105.71

The only mods I have are a M2 SS DP and a Greddy exhaust. My last ran I had 2.085 60' time, but I missed third gear!!! OOPS!!!!!!!!!!

Pressurized 04-02-02 07:22 PM

R/T .587
60' 2.020
330 5.576
1/8 8.492
MPH 86.54
1000' 10.964
1/4 13.04
MPH 108.77

Modifications- FMIC, Intake, DP, MP(restrictor plates),CB first time to the track running 10psi of boost....

RussellTT94 04-02-02 09:17 PM

R/T .904 - i think i fell asleep :)
60' 2.100
330 5.680
1/8 8.597
mph 85.55
1000' 11.085
1/4 13.186
mph 107.15

mods- intake, full exhaust, PFC

bdc196 04-03-02 03:32 AM

R/T 0.778
60' 1.793
330' 5.046
1/8 7.665
mph 96.81

Running Nitto NT-555R 225/50 drag radials that day with alot of off-the-line problems.

West TX RX-7 04-03-02 12:12 PM

Hey can you guys post the track altitude please along with your times? Moderator, maybe include that on your initial list cause it can make a huge difference.

Wilfredo Romero 04-09-02 11:28 AM

r/t.... .793
60ft... 1.965
330... 5.551
1/8... 8.520
mph... 82.48
1000.. 11.084
1/4... 13.346
mph.. 94.08

My mods are downpip and gt spec exhuast with a ported motor could of done better but i had to slammmmmm on the breaks so i wouldn't break out i'm going tommorow to see what i could of done....... oh well keep you guys posted..... oh yeah and i ran with street tires i dunno if that would of matter.....

vosko 04-19-02 08:27 PM

89 TII

RT .753
60' 2.041
330 5.816
1/8 8.955
MPH 78.34
990 11.565
1/4 13.901
MPH 99.87

@ www.atcorace.com

mods: dp,mp,cone filter, panspeed ecu, upgraded stock turbo, act race clutch, lw flywheel, tokico illumina's and eibach springs, 11psi of boost bleeding to 6psi at redline

vosko 04-19-02 08:29 PM


Originally posted by bdc196
R/T 0.778
60' 1.793
330' 5.046
1/8 7.665
mph 96.81

Running Nitto NT-555R 225/50 drag radials that day with alot of off-the-line problems.

WOW your 1/8 MPH is almost as fast as my 1/4 ;) NICE

Bigreddawg 05-03-02 07:09 AM

93 R1

RT .690
60' 2.104
330 5.726
1/8 8.728
MPH 83.25
1000 11.270
1/4 13.429
MPH 102.42

Track- Maple Grove, elev.- 548 ft.
Mods- PF Catback, boost gauge

1st pass ever with fiancee's car
2nd pass I blew it

fast13b 05-04-02 09:43 PM

I just took my TII to the 1/4 mi strip for the first time today. I've been doing sone 1/8 mi, and from these slips I picked up half a second and 6 mph there from doing the throttle body mod... This turbo is sooo all top end, (see avatar) can't wait for my 60-1... I want to sell it to someone who wants to boost 20+++ psi. I basically have everything done. Elevation is probably 50 ft. I sprung a massive oil leak out of my oil temp sensor on my last run. :doh:

Best low boost run, 8.67 psi
RT .653
60' 2.534
330' 6.398
1/8 9.433
MPH 82.22
1/4 14.167
MPH 103.57

Best high boost run, 15.87 psi
RT .548
60' 2.690
330' 6.593
1/8 9.683
MPH 82.92
1/4 14.336
MPH 106.81

Yeah, I know. I'm running a map that HITman emailed me. It is safe and functional for now until I can get it fine tuned... But at least out of my 6 runs I won them all!!!

~Jeremy

MikeL 05-05-02 05:53 AM

R/T.... .807
60'.... 2.093
330.... 5.536
1/8.... 8.208
MPH.... 93.62
1000'....
1/4.... 12.388
MPH.... 117.32


Altitude ~50'

Modifications: Nitto drag radials, Street port, Haltech, T-66, 16 psi http://brfoundation.com/RX-7/rplist.html

Horrible wheel hop! I had enough power for an 11 second run.

sk8world 05-06-02 04:02 PM

1.89 60 foot
7.94 1/8th
12.33 1/4

93vr r-1 with 91,210 miles on original motor!!

First time I ever raced on a 1/4 mile track. I was pretty happy but I was on MT ET Streets with NO burn out trying to solve my wheel hop problems. I have gone quicker in the 1/8th (1.80 60 foot, 7.80 1/8th). So with a good burn out and putting it all together I think high 11's are in the near future. As far as mods: HKS F-CON w/FCD (I know what you are thinking!!) , Profec B boost control, down pipe, mid pipe, cat back, Pettit IC, Pettit Intake, ACT clutch & light flywheel kit, cosmo fuel pump, short shifter, Mickey T's ET Drag's (DOT approved), lots of other non-power things-Eibach springs, Koni yellows, guages......

streetdreamzny 05-07-02 06:46 PM

my best 2 runs - 93 fd

rt - . 900 1.155
60 - 2.148 2.055
300 - 5.883 5.892
1/8 - 8.880 8.901
mph - 83.72 83.17
1/4 - 13.571 13.626
mph - 104.73 103.21

mods: dp. cb, intake, y-pipe, power fc , bonez clutch, short shifter, fuel pump - street tires launching around 3000 first run at .83 boost and second at .79

just curious are these bad times for my mods??

rx-7fc 05-09-02 09:52 PM

1st run
rt-.629
60-2.444
330-6.956
no 1/8
et-16.626
mph-83.391

2nd run
rt-.914
60-2.125
330-7.687
1/8-11.841
mph-56.097
et-18.396
mph-78.263
did not go in to 2nd or 3rd gear

3rd run
rt-.503
60-2.304
330-7.000
1/8-10.960
mph-62.541
1000-14.282
et-17.035
mph-82.584

4th run
rt-.726
60-2.414
330-6.994
1/8-10.870
mph-63.970
1000-14.149
et-16.947
mph81.171

i have a 86 gxl mods:racingbeat header road race,one cat,k&n filter,tb mod,msd spark plug wires,no a/c,89+intake manifold with the vdi not working it is wired open
what is wrong with my car. i don't think the 6 ports are working because the hose keeps coming off the air pump.and i think i have a vacuum leak.

Anderson 05-12-02 06:46 PM

rx-7fc, I'm 95 % sure that you problem is you 5th and 6th ports not opening. I got a faster time (16.4 with an intake) in my 88 GTU wither wired open ports. My trap speed was like 85, so I'd say check your ports.

rx-7fc 05-12-02 08:44 PM

i am going to fix the hose for it won't come off the air pump and get the vdi to work

turborotarypower 05-13-02 04:05 AM


Originally posted by streetdreamzny
my best 2 runs - 93 fd

rt - . 900 1.155
60 - 2.148 2.055
300 - 5.883 5.892
1/8 - 8.880 8.901
mph - 83.72 83.17
1/4 - 13.571 13.626
mph - 104.73 103.21

mods: dp. cb, intake, y-pipe, power fc , bonez clutch, short shifter, fuel pump - street tires launching around 3000 first run at .83 boost and second at .79

just curious are these bad times for my mods??

i would say the car can definitely run a faster 1/4 mile you have about 2 tenths or more you can make up in the 60' and with the mph your getting you should be hitting low 13's! launch the car about 5-6k rpm with doing a burnout and lower your tire pressure to about 14psi. the timeslip i'm attaching is from my worse than stock FD that had many problems but still ran 13's with 8psi of boost and 12psi in my tires with a good burnout!

streetdreamzny 05-13-02 07:03 AM

turborotarypower thanks for the advice i'll try launching at a higher rpm next time at e-town

vosko 05-14-02 12:34 PM

newer time for my TII

RT 1.071
60' 1.929
330 5.686
1/8 8.814
MPH 78.24
1000 11.497
1/4 13.748
MPH 100.11

NevadaLoneWolf 05-18-02 06:10 AM

ALL my runs....horizontal format
 
First time I ever raced
.914 2.503 7.041 10.708@67.19 13.842 16.468@84.12
.653 2.506 6.902 10.537@67.51 13.663 16.294@83.37
.924 2.997 7.555 11.166@67.99 14.276 16.905@83.44
2001^2002 V
.923 2.420 6.825 10.420@68.31 13.510 16.106@86.90
.861 2.396 6.825 10.447@67.67 13.569 16.184@84.11
.986 2.367 6.720 10.298@68.48 13.386 15.987@84.88
.990 2.382 6.807 10.418@67.98 13.528 16.143@85.13
.641 2.387 6.761 10.328@68.85 13.399 15.982@87.36
.808 2.381 6.800 10.404@68.15 13.497 16.092@86.92
.742 2.487 6.877 10.764@60.21 14.173 16.945@81.06
Opening Day^
.701 2.712 7.246 10.910@67.14 14.067 16.725@84.83
.813 2.372 6.819 10.462@67.13 13.629 16.296@84.67
.836 2.431 6.912 10.596@66.55 13.784 16.490@82.71
.461 2.516 7.023 10.664@67.71 13.787 16.412@85.02
Import Survival Series#1^
.800 2.390 6.766 10.387@67.69 13.498 16.097@85.61
.691 2.337 6.679 10.283@67.96 13.388 15.994@85.33
Import Survival Series #2^
.821 2.564 7.015 10.703@66.44 13.872 16.532@85.37
.801 2.426 6.912 10.639@65.72 13.844 16.537@84.24
.794 2.363 6.815 10.513@64.73 13.706 16.372@85.44
.559 2.560 6.986 10.680@66.29 13.855 16.542@84.70
.379 2.452 6.930 10.619@64.86 ?.000? 16.481@84.07
Spring Nationals^
All my races except for the first three have been w/o the passenger seat and spare. As for the 16.9 runs....one was cause I dumped too high and put my foot to the floor(DOH!) and the second was missing 3rd. I ALWAYS get my best runs against cars I KNOW I won't beat(except for my best run....just edged out a 92-95Civic Hatch). As for ISS#1 and Spring Nationals...it was warm those two days...is that why my times are higher(I'm blaming it on the weather either way:D )? ISS#2 I ran against a 300ZX(13.997@97.24) and a white FD(12.208@114.66)...which goes to prove I do better against cars I know I can't beat. As for the two redlights....nervous I guess. It was in the later rounds at both events. ISS#1 2nd round....S.N. Round-Robin. I need to work on my R/T..but how? Sorry for such a long post. If you can give me any pointers on how to do better...please do so. BTW, my only mod is in my sig.

turborotarypower 05-18-02 01:34 PM


Originally posted by streetdreamzny
turborotarypower thanks for the advice i'll try launching at a higher rpm next time at e-town
no problem. if you have any other questions in the future don't be afraid to ask!

Dr Wankel 05-29-02 11:50 PM

First time at the track this season.

R/T-----.665
60'-----2.262
330----5.759
1/8-----8.674
MPH----85.29
1000---11.152
1/4-----13.245
MPH----110.02

Altitude-----5800 ft :mad:


I am in need of some drag radials bad. My best 60' of the day was a 2.18 and I dont think that I could get it any lower on these tires.

LUV94RX7 05-30-02 04:03 AM


Originally posted by LETHAL RX7
R/T .567
60' 1.737
330' 4.912
1/8 7.577
MPH 92.75
1000 9.852
1/4 11.786
MPH 115.33

This was at cecil county this weekend..at 13 psi. I tried running 3rd gear out to see if i could go through the traps in 3rd but it poped the limiter so i had to put it in 4th..and they said that was my first and last run bc i dont have a cage YET. It was a good base run for the car. I have run 117 before so i contribute that to the 3rd gear thing..but i am pleased bc i know the car will go much faster...next is the cage then a tank of c16 and 18 psi and we will se what she can do...i have a t78 street ported..all that good stuff

What tires to turn 1.73 60' time???

Ken

sakurarey 06-08-02 04:03 PM

siguel
 
the new world record for a rotor is jose "siguel" torres in his 1993 mazda rx-7

http://www.urbanracer.com/features/nhratex/0350.jpg

this is a 20b engine. look for siguel to dip into the 7.0 this weekend in maple grove.
car runs turbo alcohol, no NOS.

sakurarey 06-08-02 04:17 PM

siguel
 
this is the worlds fastest rotor 13b abel "flaco" ibarras

http://www.urbanracer.com/features/nhratex/0120.jpg

Dragueur 06-11-02 05:40 PM

how come.....
 
all you guys running over 100mph are into the 13s and im NOT...:confused: :( :mad:

R/T-----.644
60'-----2.344
330----6.137
1/8-----9.232
MPH----79.862
1000---
1/4-----14.105
MPH----101.137

i am STOCK...with wheel hop and my clutch is going out....:confused:

95Base MB with 60K miles....

vosko 06-13-02 12:36 PM

look at your 60FT that explains it ALL!
my TII ran 13.7 with a 1.92 60FT on street tires.
the launch is the hardest thing it is crucial to getting a good time at the drag strip!
practice makes perfect :)

machinehead 06-20-02 02:12 AM

Finally broke 12's!!!
RT .582
60' 1.877
330 5.13
1/8 8.156
1/8 mph 87.137
1000' 10.484
1/4 12.557
mph 109.995
LACR Palmdale Ca elev. 2,710'

TO4S, Apexi FMIC, Apexi PFC, street port, 1600cc secondaries running .9BAR w/MT ET Streets and centerforce clutch that was slipping badly. (ACT 6 puck on the way!)

Come on 11's!

amp 06-20-02 09:01 PM

analyze away
 
3 runs at E-town - first timer

R/T 1.251/1.027/.676
60' 2.327/2.240/2.369
330 6.112/6.132/6.088
1/8 9.235/9.190/9.049
MPH 77.20/82.56/84.36
1000' 11.972/11.767/11.608
1/4 14.216/13.917/13.747
MPH 101.79/105.94/103.67


Altitude (if known)

Modifications
PFC @ 10psi/Pulley Kit/JH2K DP/JH2K Resonated MP/RB Catback
Efini Ypipe/K&N Drop-in/70K miles/bald street tires/2840lbs with driver
93R1

concensus is that i should be in the low 13s..

RXTASY1 07-05-02 11:25 PM

In to the 12's!
 
R/T------.822 (Sucks)
60'------1.962
330'----5.411
1/8-----8.267
MPH----86.72
1000---10.748
1/4-----12.843
MPH----107.96

I raced a supercharged Mustang 5.0 Cobra. Here is the video!
http://www.brfoundation.com/rx-7/video/1284.wmv

RXTASY’s 87’ Mazda RX-7 Turbo II

*Series 4 J-Spec Engine *TO4 Proturbo *Haltech E6K *S5 turbo manifold
*Throttle Body Mod. *720cc Primaries/1600cc Secondaries
*Greddy Turbo Timer, A/F Meter & O2 sensor, FMIC, Type R BOV
*RB Sway Bars *Walbro Fuel Pump
*Apex S-AVCR, GT Spec Exhaust
*Bonez Downpipe, Intake *ACT 6 Puck Clutch
*Magnecore 10mm Wires *Understanding Wife
*Red Silicone Vacuum Lines *Optima Red Top Battery *Hurst Line Locs
*Falken Tires-205/55/R16-Front *Nitto NT-555R 225/50VR16-Back
*2700 LBS. *300 RWHP

matty 07-08-02 10:25 AM

2nd time at etown:
60' --- 2.03
1/4 --- 12.724
mph --- 111.4

mods...full exhaust, intake, power fc

Don-94BB R2(NJ) 07-09-02 05:30 PM

My best time at E-town 5/4/02

Temp was about 55-60 degrees

60' 1.943
330' 5.290
1/8 8.049
MPH 87.99
1000' 10.444
1/4 12.449
MPH 113.21

This was running on street tires with 18psi of pressure in them.

Mods are M2 intake, Pettit ECU, UR pulley kit, M2 large IC, ACT street/strip clutch with 8.5 lb flywheel, short shifter, J&S knocksensor, DP and GReddy SP. Still running main cat. Boost was about 14-15 lbs with 100 octane. No lights popped up on my J&S. Car weight with full interior and me in it was about 2930 lbs with about 1/4-1/8 tank of gas.

Dynoed at this setup with 331RWHP and 284 TQ. 39,000 miles, original engine and turbos.

amp 07-10-02 11:50 PM

Re: analyze away
 

Originally posted by amp
3 runs at E-town - first timer

R/T 1.251/1.027/.676
60' 2.327/2.240/2.369
330 6.112/6.132/6.088
1/8 9.235/9.190/9.049
MPH 77.20/82.56/84.36
1000' 11.972/11.767/11.608
1/4 14.216/13.917/13.747
MPH 101.79/105.94/103.67


Altitude (if known)

Modifications
PFC @ 10psi/Pulley Kit/JH2K DP/JH2K Resonated MP/RB Catback
Efini Ypipe/K&N Drop-in/70K miles/bald street tires/2840lbs with driver
93R1

concensus is that i should be in the low 13s..

2nd time at E-town with same mods plus RB inlet duct
60' 2.231
1/4 13.304
MPH 106.30

vosko 07-11-02 02:55 AM

you need your 60ft 2.00 or below to get a nice time :)

amp 07-11-02 08:25 AM

workin on it..
i was told that for every tenth you lose on your 60ft..its roughly a 2 tenths gain on your quarter et...is this correct ?

vosko 07-11-02 12:40 PM

yeah as long as you are driving good. i drove streetdreamzny car on saturday. i ran 13.6 @ 107 with 2.3 60 ft. he ran 13.6 @ 109 with a 2.00 60ft and more boost! driving better makes a BIG difference. the launch is a big step but don't forget about trying shift so fast you chirp every gear :D


All times are GMT -5. The time now is 07:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands