Methanol water injection on N/A
05-10-17, 04:22 PM
#1
Full Member
Thread Starter
Join Date: Apr 2017
Location: Virginia
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Methanol water injection on N/A
I read up on water methanol injection, and from what I found they will still increase performance on an N/A engine. I have a 88 vert that I bought a kit for. However, I was just talking to the guy at my local rotary shop, and he said I was wasting my time since my Rx7 isn't turbo.
05-10-17, 05:11 PM
#2
You certainly wont need the extra knock-resistance of water meth, e85 or even premium on an n/a rotary. Is possible you might get a bit of steam-effect? cooler combustion and clean all the carbon off?
I doubt its worth it but you could give it a go... nitrous would give you a giddy up, and be the better add on, or just breathing mods and a tune unless you already have.
I doubt its worth it but you could give it a go... nitrous would give you a giddy up, and be the better add on, or just breathing mods and a tune unless you already have.
05-11-17, 08:36 AM
#3
Full Member
Thread Starter
Join Date: Apr 2017
Location: Virginia
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
You certainly wont need the extra knock-resistance of water meth, e85 or even premium on an n/a rotary. Is possible you might get a bit of steam-effect? cooler combustion and clean all the carbon off?
I doubt its worth it but you could give it a go... nitrous would give you a giddy up, and be the better add on, or just breathing mods and a tune unless you already have.
I doubt its worth it but you could give it a go... nitrous would give you a giddy up, and be the better add on, or just breathing mods and a tune unless you already have.
Well damn lol...guess I'll return the kit. That's $400 I could use towards something else for the car.
Breathing mods - could you elaborate?
05-11-17, 08:36 PM
#7
Full Member
Thread Starter
Join Date: Apr 2017
Location: Virginia
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man that's super helpful.