Rotary Car Performance General Rotary Car and Engine modification discussions.

I broke 10's on Twins!!!!

Thread Tools
 
Search this Thread
 
Old 03-24-02, 12:50 PM
  #26  
It has begun

Thread Starter
iTrader: (20)
 
lane_change's Avatar
 
Join Date: Feb 2002
Location: Houston, TX
Posts: 3,393
Received 17 Likes on 5 Posts
So was mine. I know how to drive. I've been drag racing for about 2 years now and I have previously been driving a 97 GSX and I got used to it and the hard launches, but now I have sold my GSX and moved on to bigger and better things, my FD. I understand what you mean about other drivers and times but I am wanting to see what a "good" driver can accomplish with similar mods. The FD is a lot different then my GSX as far as launching goes because of the RWD. This is my first RWD car and on the street I am starting to get it down but the track has always been a completely different arena all together and I have ran through on the street at around 112mph based on our 1/4 mile area which is fairly close but of course not perfect. I used to be able to throw down 1.7 60' and 12.2 1/4 miles in my GSX and I hope to be able to outrun my GSX eventually. On the street is where the Eclipse really shined because of small amount of tire spin but the FD''s I have seen at the track seem to hook up pretty good as well so I'll just hope for the best. But when I get there I would like to be able to make a pass and say "that's about right" Practice makes perfect but I don't want to high of goals for myself but I also don't expect 13.5 or higher. I hope for a mid 12 or so, is that about right? BTW, I don't have a sister either. So don't arrest me Mr. Forum Cop. Your eyes look a little GLAZED, have you been eating DONUTS?
Old 03-28-02, 01:03 AM
  #27  
Rotary Enthusiast

 
kwikrx7's Avatar
 
Join Date: Mar 2001
Location: Mechanicsburg, PA USA
Posts: 1,392
Likes: 0
Received 0 Likes on 0 Posts
You'll need to lose the cat for a hi-flo cat or midpipe for low-mid 12s - I'd say you'll run 12.8-12.9 at 109.
Old 03-28-02, 12:14 PM
  #28  
It has begun

Thread Starter
iTrader: (20)
 
lane_change's Avatar
 
Join Date: Feb 2002
Location: Houston, TX
Posts: 3,393
Received 17 Likes on 5 Posts
I went ahead and bought a RX7 Fashion Midpipe and a Denso Fuel Pump and am getting my PFC retuned by XS engineering. So now I have a few more ponies under the hood. The track will be closed this weekend anyways so I will have to wait.
Old 04-01-02, 08:31 PM
  #29  
Rotary Enthusiast

 
T88Rx7's Avatar
 
Join Date: Feb 2002
Location: Florida
Posts: 750
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by AnthonyNYC


Mods at the time were...
Street Ported motor with 3mm seals done by T and R Racing
Downpipe, presilencer, Apex N1 single cat back
ACT Street strip clutch combo
Greddy Profec B
Greddy front mount intercooler
Custom intake
Paxton fuel pressure regulator
Stock ignition w/ Magnecor Wires
Kaaz differential w/ 4.30 gears
Pettit ECU with Unlimited chip
HKS AIC used for more than 15psi
Upgraded intank Fuel Pump

T and R do the work on the car.
Raz and Rampage helped me tune the AIC when I dynoed there.
Anthony do you know josey it sounds like his setup when he had the white 94 fd. he also ran a 11.1 on stock twins.
Old 04-01-02, 10:29 PM
  #30  
RX-Parts

iTrader: (3)
 
SPEED_NYC's Avatar
 
Join Date: Mar 2001
Location: Queens, NY
Posts: 2,368
Likes: 0
Received 1 Like on 1 Post
Originally posted by T88Rx7


Anthony do you know josey it sounds like his setup when he had the white 94 fd. he also ran a 11.1 on stock twins.
you sure he ran 11.1 on the stock twins? i remember his car running hard, but not that hard. and when it was really running good on the twins, i think he had the PFC in there.

just to answer your question, yeah anthony knows Jose..
Old 04-02-02, 06:07 AM
  #31  
Rotary Enthusiast

 
T88Rx7's Avatar
 
Join Date: Feb 2002
Location: Florida
Posts: 750
Likes: 0
Received 0 Likes on 0 Posts
nah he told me he was running the pettit unlimited with more fuel to run higher boost and the regular bolt on stuff.
Old 05-13-02, 04:44 AM
  #32  
Stay tuned...

iTrader: (3)
 
AnthonyNYC's Avatar
 
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like on 1 Post
Originally posted by T88Rx7


Anthony do you know josey it sounds like his setup when he had the white 94 fd. he also ran a 11.1 on stock twins.
I know Josey very well. His best time was a 12.0 but that was when no one was running 12.0 in a street FD.

Anthony
Old 05-14-02, 05:34 PM
  #33  
Rotary Enthusiast

 
Boostn7's Avatar
 
Join Date: Feb 2001
Location: Union, NJ
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Anthony did run 11.1 on stock twins...that car ran hard.
Belive it was street-port, Pettit unlimited chip and non-seq turbos.

and to shed some new light on the subject......

My 94 FD just ran 12.004 @ 114.66mph with 92mph in the 1/8th on Nitto drags with only few bolts-ons.
Still on stock motor (43k miles), non-seq turbos(14psi), stock intercooler, injectors and fuel pump.

Mods are...Greddy PE cat-back, Greddy air filter, mid-pipe, 3" down pipe, Crane HI-6 and Power FC with base maps

I know fuel pump and injectors are pretty much maxed out but high 11's will happen soon !!!

Later
Old 05-15-02, 05:25 AM
  #34  
RX-Parts

iTrader: (3)
 
SPEED_NYC's Avatar
 
Join Date: Mar 2001
Location: Queens, NY
Posts: 2,368
Likes: 0
Received 1 Like on 1 Post
Originally posted by Boostn7
Anthony did run 11.1 on stock twins...that car ran hard.
Belive it was street-port, Pettit unlimited chip and non-seq turbos.

and to shed some new light on the subject......

My 94 FD just ran 12.004 @ 114.66mph with 92mph in the 1/8th on Nitto drags with only few bolts-ons.
Still on stock motor (43k miles), non-seq turbos(14psi), stock intercooler, injectors and fuel pump.

Mods are...Greddy PE cat-back, Greddy air filter, mid-pipe, 3" down pipe, Crane HI-6 and Power FC with base maps

I know fuel pump and injectors are pretty much maxed out but high 11's will happen soon !!!

Later
John, we know anthony ran 11.1 on the twins, we wetre disputing the claim that Jose had run that time on twins....
Old 05-15-02, 12:26 PM
  #35  
Senior Member

 
Dragueur's Avatar
 
Join Date: Aug 2001
Location: Sacramento
Posts: 483
Likes: 0
Received 0 Likes on 0 Posts
lane change....

you run yet?!??!?!?!
Old 05-15-02, 01:27 PM
  #36  
It has begun

Thread Starter
iTrader: (20)
 
lane_change's Avatar
 
Join Date: Feb 2002
Location: Houston, TX
Posts: 3,393
Received 17 Likes on 5 Posts
I ran once at the track. I think I have a slipping clutch pretty bad because every time I shift my RPM's drop fast. My best was a 13.4@107. The track is known to run slow but I was pretty disappointed. It's alot different then racing my GSX. I have a new Intake, FMIC, and Exhaust coming in and I am going to order a new clutch here pretty soon. They say this track runs about 1 second slow but they could be lying to theirselves to make them feel faster. I took 2nd in my class but lost to a Talon AWD. I am going to try again this weekend or next. Hopefully it was just the track but we'll see.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Logan Reinisch
General Rotary Tech Support
44
09-17-18 12:20 PM



Quick Reply: I broke 10's on Twins!!!!



All times are GMT -5. The time now is 05:51 AM.