how to 13b?
#1
Newbie
Thread Starter
Join Date: Sep 2005
Location: GUAM
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
how to 13b?
got a 1988 13b 6port and would like to know how to switch from FI to carbs.....what do i need on the motor and what i can trash. OMP. Distributor?......what it takes to do this mod.
thanks any help will be appreciated.
thanks any help will be appreciated.
#2
Where's the Meth
iTrader: (1)
If your intending to run electronic ignition and carbie, you could remove nearly all the wiring, I'd keep oil and temp indicators but that it'd be about it. You'd need power supplying the power packs for the dizzy, and the alternator.
Depending on the carbie your going to use, you should be able to get an inlet manifold to suit, or an earlier generation manifold and an adaptor plate.
Depending on the carbie your going to use, you should be able to get an inlet manifold to suit, or an earlier generation manifold and an adaptor plate.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM