Anyone ever measure PRE IC air temps?
#1
Hey, where did my $$$ go?
Thread Starter
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Anyone ever measure PRE IC air temps?
Guys I was wondering if any of you have ever measured the air intake temps on the hot side of the IC
If so please share a little info, I'd like to know how much boost you were running at the time and what turbo. Also if the temp was closer to the turbo or the IC
Thanks,
STEPHEN
If so please share a little info, I'd like to know how much boost you were running at the time and what turbo. Also if the temp was closer to the turbo or the IC
Thanks,
STEPHEN
#2
Rotor Head Extreme
iTrader: (8)
Well here is some info I provided in ZeroBanger's WI thread:
Hope this helps.
Here is a comparison of the M2 medium and M2 large SMIC from Sport Compact Car's test on their project Rx7 a few years back. All temps in F.
M2 medium, M2 large
Ambient Temp: 65 , 65 (med,large)
Intake Temp: 98 , 92
Peak intake temp (0-80)mph: 105 , 99
Turbo out temp: 230 ,230
Press. loss (psi): 1.1 ,1.1
Max boost press (psi): 13 , 13
* measured during a 3rd gear WOT run from 3000 to 7000 rpm-all peak numbers were recorded a 7000rpm[/B]
M2 medium, M2 large
Ambient Temp: 65 , 65 (med,large)
Intake Temp: 98 , 92
Peak intake temp (0-80)mph: 105 , 99
Turbo out temp: 230 ,230
Press. loss (psi): 1.1 ,1.1
Max boost press (psi): 13 , 13
* measured during a 3rd gear WOT run from 3000 to 7000 rpm-all peak numbers were recorded a 7000rpm[/B]
Hope this helps.
Last edited by t-von; 02-21-04 at 03:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM