rx3 for autoX
#1
Full Member
Thread Starter
Join Date: Mar 2011
Location: chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
rx3 for autoX
Just wondering what rear end to go with....I have a old ford 9 inch just sitting there but Idk if thatll be too heavy for just autoX hopefully someone could help me out... Thanks
-eddie
-eddie
#3
premix, for f's sake
iTrader: (6)
Give us some info on the power plant. Personally, I think a 9" is absolutely unnecessary , and likely a large hindrance, for any Autox usage. I say stick with 1st gen Rx-7 axles w/ a LSD. They're lighter than most other axles, while still offering moderate strength for most 2 rotor NA apps, disc brakes, LSD's... The biggest axle ide consider goin would be a Ford 8.8, and even then it would be heavy and overkill for autoX in the Rx-3, unless you also drag race with boost and slicks in the same car
#5
Full Member
Thread Starter
Join Date: Mar 2011
Location: chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Well I just got a slightly modded t2 motor it. So I'm not pushing massive power, and I have a sp LSD . and I hear of a bunch of people breaking Mazda rear ends with stock t2 motors
-eddie
-eddie
#6
Banned. I got OWNED!!!
That's because of nasty pinion angle change from junk geometry, not because the axle itself is weak.
Fix the geometry, handle more power.
Fix the geometry, handle more power.