Will a miata 4.78 Rear pinion gear fit in a TurboIi Diff?
#1
Will a miata 4.78 Rear pinion gear fit in a TurboIi Diff?
i'm trying to tighten up my gearing and asides the Rx8 4.44 and 4.77 Rears what other rear ends with above 4.44 will fit in the TurboII Rear end? i was wondering if the miata 4.78 will Fit inside?
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
Mazda has two differentials (that we care about).
the P type, which is used in all the RWD V6 or turbo cars. the turbo 2, FC, Rx8 (mpv,929 etc) use this type. it has an 8" ring gear.
the M type is the other one. its used in the RWD 4 cylinder cars, like the S2000, 94-05 miata, R100/Rx2/3/4/5/7. the Na FC uses this type with a long pinion. the M type has a 7" ring gear.
the P type, which is used in all the RWD V6 or turbo cars. the turbo 2, FC, Rx8 (mpv,929 etc) use this type. it has an 8" ring gear.
the M type is the other one. its used in the RWD 4 cylinder cars, like the S2000, 94-05 miata, R100/Rx2/3/4/5/7. the Na FC uses this type with a long pinion. the M type has a 7" ring gear.
#3
i have a turbo ii rear and a rx8 4.44 gear and pinoon currently but i want to tighten up my gearing more, but not wanting to spend $2400 on 5.12, so im trying to see if anyone else has tried other options, the info you gave me is quite helpful, gives me an area to start looking at their rear final drive, thanks
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
i have a turbo ii rear and a rx8 4.44 gear and pinoon currently but i want to tighten up my gearing more, but not wanting to spend $2400 on 5.12, so im trying to see if anyone else has tried other options, the info you gave me is quite helpful, gives me an area to start looking at their rear final drive, thanks
Thread
Thread Starter
Forum
Replies
Last Post