Transmission Blanket / Scatter shield question
#1
No more 7 or 8
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: San Bernardino - So Cal
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Transmission Blanket / Scatter shield question
Here is a question that i am sure has been asked, but could not find in the search.
I will need (according to NHRA ) a scatter shield/Transmission Blanket (of course SFI aproved)
The only Transmission Blankets i can find are from Summit, and Jegs made by RCI. and naturally i can not find any scatter shields.
MY QUESTION IS: does anyone know if someone makes scattersields for a second gen Turbo II tranny? does anyone know if the "universal" blankets fit. (they are more desighned for tourqe flight trannys and such)
anyone have any experiance in this. i am sure i am not the only one that has needed to put a scatter shild on there car.
Thanks guys!
I will need (according to NHRA ) a scatter shield/Transmission Blanket (of course SFI aproved)
The only Transmission Blankets i can find are from Summit, and Jegs made by RCI. and naturally i can not find any scatter shields.
MY QUESTION IS: does anyone know if someone makes scattersields for a second gen Turbo II tranny? does anyone know if the "universal" blankets fit. (they are more desighned for tourqe flight trannys and such)
anyone have any experiance in this. i am sure i am not the only one that has needed to put a scatter shild on there car.
Thanks guys!
#3
i assure you that there are rx7's that have needed this stuff well before you. Try searching around for some of the drag guys. I know there is a 3 rotor first gen that runs low 10's or better and there are lots of other guys with rx-3's and the like. It's very big in puerto rico to have the rotor drag cars. just look around and search for their websites to contact them.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM