Problems with my WB
#1
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Problems with my WB
I bought a techedge WB and it was working for a while, but now its only showing 14.6 all the time and i know this is not correct, with is after the car is warm. It was working before now died on me, its just showing a stagnet reading. Dose this mean my sensor went bad already? There isnt much to the system so im stumped on what could be wrong!
#2
Former Rx7 *****
Join Date: Nov 2001
Location: Mississauga
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
What trouble shooting hae your done?
Did you ask Peter Gargano on the Techedge mailing List?
Which version do you have? 1.0? 1.1? 1.5? 1.6? 2.0 rev2 or rev3?
What type of fuel do use?
I just put together the 2.0 rev 3 and it works perfect.
I would try pulling the wideband out of the exhaust pipe and have it run in free air, it should go full lean indicated by 4.L on the LD01/5301/5300 display.
Lastly, i don't think this thread belongs in the race car forum
Did you ask Peter Gargano on the Techedge mailing List?
Which version do you have? 1.0? 1.1? 1.5? 1.6? 2.0 rev2 or rev3?
What type of fuel do use?
I just put together the 2.0 rev 3 and it works perfect.
I would try pulling the wideband out of the exhaust pipe and have it run in free air, it should go full lean indicated by 4.L on the LD01/5301/5300 display.
Lastly, i don't think this thread belongs in the race car forum
#4
Former Rx7 *****
Join Date: Nov 2001
Location: Mississauga
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
1.0? sorry but i'm not familar with that version. That was 2 years ago i think when it was released. Peter Gargano is the owner of Tech Edge and also put together almost all of the tech edge kits.
I would goto wbo2.com to find more information
I would goto wbo2.com to find more information
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM