oiling for turbo when deleting omp n running premix
Thread Starter
Junior Member
Joined: Jan 2014
Posts: 48
Likes: 0
From: bangor pa
oiling for turbo when deleting omp n running premix
So I'm deleting my omp on the 13brew single turbo that's going into my 85 rx7 n I talk to people n they don't run any oil in the engine only premix i don't see how that can work due to oil needing to be there for the bearings in the turbo or is the premix enough
Joined: May 2005
Posts: 3,243
Likes: 42
From: Kennewick, Washington
I think there was a slight misunderstanding in your interpretation.
The oil metering pump injects oil from the engine's primary reservoir (oil pan) into the combustion chamber to lubricant internals that can no be lubricated via a pressurized system.
Pre mixing means the oil for this purpose is injected along with fuel video the fur injectors.
The engine still has the oil pan and oil pump for pressurized oil being fed to the bearings and such.
The oil metering pump injects oil from the engine's primary reservoir (oil pan) into the combustion chamber to lubricant internals that can no be lubricated via a pressurized system.
Pre mixing means the oil for this purpose is injected along with fuel video the fur injectors.
The engine still has the oil pan and oil pump for pressurized oil being fed to the bearings and such.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM