Motor is installed in the car and is almost ready to fire up. Added quite a few pictures of the build up and misc parts installed.
Dan |
The build has come along nicely. How soon until she's ready for SM2 action?
|
If we don't run into any issues at startup another week or so. Our next local event is 5/11 so that gives me about 2 weeks to get everything sorted out.
Dan |
very nice car. good luck with it.
|
Yet another update with a bunch more pictures and a write up at the end about the first start.
Dan |
Added pictures of the wing fabrication and inside wiring. Also a small right up at the end of the thread.
Build thread Dan |
Added pictures and specs of the alignment and corner balancing.
Dan |
Saw the car in action this weekend, good job.
|
Originally Posted by NeoTuri
(Post 8204857)
Saw the car in action this weekend, good job.
Now I need to work on the biggest limiting factor.... driver :) Dan |
So... when will you have something to topple Erik's car? ;)
|
Originally Posted by NeoTuri
(Post 8214247)
So... when will you have something to topple Erik's car? ;)
Added a video and some action pictures from the Atlanta National tour. Dan |
Very nice and informative write-up! I autocross in SM2. My car is starting to show early signs of a bad coolant seal(s) and your build-up has got me interested. How is the low-end/boost response now with the higher compression rotors? I too have the 99 twins, however I feel as though the 93-95 twins had higher torque at lower boost pressures compared to the 99s. The 99s feel much better at 10-15psi.
I think it rude to ask people how much they pay for things, but could you perhaps PM me with how much I could *expect* to pay for a similar motor setup??? Thank-you! |
Originally Posted by DJF(NJ)
(Post 8225655)
Very nice and informative write-up! I autocross in SM2. My car is starting to show early signs of a bad coolant seal(s) and your build-up has got me interested. How is the low-end/boost response now with the higher compression rotors? I too have the 99 twins, however I feel as though the 93-95 twins had higher torque at lower boost pressures compared to the 99s. The 99s feel much better at 10-15psi.
I think it rude to ask people how much they pay for things, but could you perhaps PM me with how much I could *expect* to pay for a similar motor setup??? Thank-you! Dan |
chadwick, i still can't see your build thread without logging in. :(
hopefully we'll see you at the next nashville autox :) |
Dan,
I used to peak at about 250ft-lbs on my first turbo when it was bone stock. It would drop off to about 225 before the transition point, then spike to 300+ after the transition. This was at about 15psi. I didn't figure out I had the sticking solenoid issue where it would blow off boost when going back down to just the primary turbo (I'm pretty sure you have the fixed). When it *didn't* have that issue, the car was a rocket off the corners with the 4.77 gears. -Andy |
Originally Posted by AMRX7
(Post 8240795)
Dan,
I used to peak at about 250ft-lbs on my first turbo when it was bone stock. It would drop off to about 225 before the transition point, then spike to 300+ after the transition. This was at about 15psi. I didn't figure out I had the sticking solenoid issue where it would blow off boost when going back down to just the primary turbo (I'm pretty sure you have the fixed). When it *didn't* have that issue, the car was a rocket off the corners with the 4.77 gears. -Andy Dan |
hey very nice car man! I'm just getting into autocross, i'm in SM2 also. I'm still getting used to the car as it is but its a lot of fun. im still on stock R1 suspension but after a few more events of getting used to the stock suspension i'm looking to get konis on my car and some new springs. just need to figure out what rates i'm gonna get. keep up the good work!:) :icon_tup:
|
Dan, you put the Kaaz and 4.77 in yet?
|
Originally Posted by memphisraines82
(Post 8313909)
Dan, you put the Kaaz and 4.77 in yet?
Dan |
Been awhile since I posted an update on here. Added some action pictures after the the Kaaz and 4.77 were installed. What a great upgrade.
Build thread Dan |
|
Well I guess they are still blocking links to the Rotary Car Club . Com but if you click on the quote button you can copy and paste the link in your browser.
Dan |
^^^
Catually you can't the asterisks show up there too... but I'll search for ya over at RCC. |
Originally Posted by ptrhahn
(Post 9113813)
^^^
Catually you can't the asterisks show up there too... but I'll search for ya over at RCC. Here is one of the pictures: http://www.tweakit.com/rx7/rx7trscca1.jpg |
Here is the in car video from the sameday that picture was shot:
http://www.youtube.com/watch?v=lVNW1l4e3P8&fmt=18 Dan |
All times are GMT -5. The time now is 03:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands