longacre ignition switch
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Northern Kentucky
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
longacre ignition switch
I'm trying to replace the Ignition switch in my 1984 RX7 with a push start button. I can not find which wire from the switch engages the starter. I'm assuming it is either the Black Red, Blue, or Red Black. I can not find any of these on the wire diagrams. This is strictly a track car.
Took a look at this web site http://www.rotorhead.ca/topic.php?fl...nt=remotestart and I’m still a little confused. The longacre switch I'm using has 3 wires a brown for hot wire, yellow for accessories, and green for the starter button. I hooked white/red to the brown, black/white to the yellow, and black/yellow to the green. When I turn the toggle on the gauges come on and that's it. When I press the start button, I can hear the fuel pump kick on, but it is not spinning the starter. It almost seems like I should hook the black/yellow, along with the Black/white to the yellow and there should be another for the starter. Any help would be greatly appreciated.
Thanks,
Took a look at this web site http://www.rotorhead.ca/topic.php?fl...nt=remotestart and I’m still a little confused. The longacre switch I'm using has 3 wires a brown for hot wire, yellow for accessories, and green for the starter button. I hooked white/red to the brown, black/white to the yellow, and black/yellow to the green. When I turn the toggle on the gauges come on and that's it. When I press the start button, I can hear the fuel pump kick on, but it is not spinning the starter. It almost seems like I should hook the black/yellow, along with the Black/white to the yellow and there should be another for the starter. Any help would be greatly appreciated.
Thanks,
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM