FC3S owners using Holley Red pumps.
#2
TaK
iTrader: (1)
Don't do it. Holley reds and blues are noisy and leak.
If its a fc3s second gen rx7 just use the in tank pump with a aeromotive bypass regulator part #13301
Your stock N/A pump is far better than a holley red. This regulator also comes with a EFI spring if you decide to upgrade or need it for another build. This will also work with blow through turbo unlike the holley.
If its a fc3s second gen rx7 just use the in tank pump with a aeromotive bypass regulator part #13301
Your stock N/A pump is far better than a holley red. This regulator also comes with a EFI spring if you decide to upgrade or need it for another build. This will also work with blow through turbo unlike the holley.
Last edited by ghost1000; 10-20-13 at 08:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM