Beef up rear end for drag racing
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2001
Location: long beach, ca
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Beef up rear end for drag racing
What are some other ways that you can do to make the rear end on a fd stronger,
Trailing arms,
Toe links,
Harder diff brushing,
I rememeber something about welding reinforcement brackets onto the diff gear itself.
andrew
Trailing arms,
Toe links,
Harder diff brushing,
I rememeber something about welding reinforcement brackets onto the diff gear itself.
andrew
#2
Check the 3rd gen section. Vosko supposedly has a bulletproof tranny/rear end. He started with a TII diff with an extra brace, I think. New pillow bushings, along with the trailing and toe links is also part of the equation.
#3
Senior Member
Join Date: Apr 2003
Location: Ft. Lauderdale
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
PM RX_Rotary, he sells a really nice differential brace, that eliminates almost all wheel hop as well as saving your diff. from those 6000rpm launches. Depending on how mch power you have race axels might be a option as well.
#6
Lives on the Forum
me. i sell and make it. i am who ragerace was saying to PM.
https://www.rx7club.com/forum/showth...hreadid=194582
sorry. the GB is over, but i will still sell them.
email the addy that i have written across the pic.
rxrotary2_7@yahoo.com
https://www.rx7club.com/forum/showth...hreadid=194582
sorry. the GB is over, but i will still sell them.
email the addy that i have written across the pic.
rxrotary2_7@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post