aftermarket fuel pressure
#1
aftermarket fuel pressure
i posted this in the 2nd gen forum but no one answered it
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/aftermarket-fuel-pressure-414659/
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/aftermarket-fuel-pressure-414659/
#2
Mad Man
Nobody gave you an answer, because you really did not ask a complete question.
- what FPR
- NA/Turbo/Nitrous?
- what's the rest of your set-up
- the AFR Guages are not good for anything since the generally use a narrow band sensor.
- Tell us your complete set-up,car, what your goals are, how all your lines are run, and the brand, and model # of all pertinent components.
If you do that I will give you all the infio you can handle plus, as will many others on the forum. You got a bunch of answers from people who did mnot know what the question was LOL. Regards, Carl
- what FPR
- NA/Turbo/Nitrous?
- what's the rest of your set-up
- the AFR Guages are not good for anything since the generally use a narrow band sensor.
- Tell us your complete set-up,car, what your goals are, how all your lines are run, and the brand, and model # of all pertinent components.
If you do that I will give you all the infio you can handle plus, as will many others on the forum. You got a bunch of answers from people who did mnot know what the question was LOL. Regards, Carl
#3
Originally Posted by Carl Byck
Nobody gave you an answer, because you really did not ask a complete question.
- what FPR
- NA/Turbo/Nitrous?
- what's the rest of your set-up
- the AFR Guages are not good for anything since the generally use a narrow band sensor.
- Tell us your complete set-up,car, what your goals are, how all your lines are run, and the brand, and model # of all pertinent components.
If you do that I will give you all the infio you can handle plus, as will many others on the forum. You got a bunch of answers from people who did mnot know what the question was LOL. Regards, Carl
- what FPR
- NA/Turbo/Nitrous?
- what's the rest of your set-up
- the AFR Guages are not good for anything since the generally use a narrow band sensor.
- Tell us your complete set-up,car, what your goals are, how all your lines are run, and the brand, and model # of all pertinent components.
If you do that I will give you all the infio you can handle plus, as will many others on the forum. You got a bunch of answers from people who did mnot know what the question was LOL. Regards, Carl
fpr is listed in signature SX-6
na right now, nitrous when i get it
setup is listed in signature, parralel setup for the fuel lines
http://fc3spro.com/TECH/MODS/FUEL/pararail.jpg
just ordered my crane cam hi-6 for ignition and retard control on the nitrous
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM