I`ve got some wrong values on my logs. For example Inj Duty shows
values from 0.0 to 780.0. But the right values must be 0 to 78.0. How
can i correct the decimal place of the value?

Thanks for any help

Ray

 

I looked at one of my old logs. No matter what changes to the numer of decimal points I made, they always were correct.

Map Watch - View - Dec Places

 

Yes i knew where u can corrected the Dec Places. But when u put 1 or 2 Dec Places it shows
by idle 38,0 or 38,00. Not 3,8 Dutycircle or is there an Valuearrangement that it let it read only above up 10???

 

From your description, it appears your is multiplying by 10s instead of changing the number of points after the decimal.

Does it do this for other readings on the log?

 

i can send u an log if u want and u can see if the problem is anywhere.

 

here is an log that i made.
my upgrades are: street Port ,4x850ccm,seq. Twins,V-Mount IC and Radiator,remouve airpump,Air control and coolantseperator tank.
Dp,High flow cat,M2 Cat back that´s it.

Sorry this will not be made because the file is too large....

Is an other way possible???

 

email the text log file to cewrx7r1@yahoo.com