Power FC Forum Apex Power FC Support and Questions.

Power FC Willing to pay for a base tune...

Thread Tools
 
Search this Thread
 
Old Jun 9, 2014 | 05:42 PM
  #1  
R34240sx's Avatar
Thread Starter
Junior Member
iTrader: (7)
 
Joined: Aug 2012
Posts: 22
Likes: 0
From: Phoenix
Willing to pay for a base tune...

Can't seem to get my car to idle smooth or rev at all on the current tune...


Actually have my car pretty heavily modded.. I'll list the variables and if someone can shoot me a tune that works I would happily throw you some monies...

Thanks

Aeromotive 390 pump
62lbs of Fuel pressure with vacuum pinched off
1000ID and 2000ID
GT4088 1.06
GM 3bar map
E85

Let me know if there's anything else you need... Please PM me here...
Reply
Old Jun 13, 2014 | 05:47 PM
  #2  
cewrx7r1's Avatar
Eye In The Sky
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 7,941
Likes: 133
From: In A Disfunctional World
Since E85 requires about 35% more fuel for the same calories as gas; all fuel values in the PFC need to be increased. That is starting table, acceleration table, water temp correction, ETC!

The injector tables also need to be correct.
Reply
Old Jun 13, 2014 | 06:02 PM
  #3  
cewrx7r1's Avatar
Eye In The Sky
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 7,941
Likes: 133
From: In A Disfunctional World
ID 1000 at 43.5 psi flow 1015 cc/min, at 65 psi they flow 1225 cc/min.
ID 2000 at 65 are 2680 cc/min.
I hope your injector tables are correct or close.
Reply
Old Aug 10, 2014 | 05:40 PM
  #4  
R34240sx's Avatar
Thread Starter
Junior Member
iTrader: (7)
 
Joined: Aug 2012
Posts: 22
Likes: 0
From: Phoenix
Wow. I didn't see your response. I am still trying to get this car tuned properly. Any help would be much appreciated, and I have no problem paying someone to help me out either.

Feel free to PM me and I'll give you my number.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post




All times are GMT -5. The time now is 11:24 AM.