All right finally ready to order the Power FC from XS Engineering wondering if there was anything special I should ask them to program. The mods to the FD are as follows: Apexi Power Intake, Apexi GT spec exhuast, M2 downpipe, 3" midpipe Apexi avc-r, and Apexi dual chamber blow off valve.

 

Nah thats just fine with the Base Mod Map. I wouldnt have them do anything to it until you get an intercooler and fuel upgrades.

 

Ok thanks just wondered
time to pull the plastic devil out of the old wallet and pick up the phone.

 

You could tell them to make the ECU turn your fans on at a lower temp, like 85 or 90C.

 

If you don't know somebody with a Datalogit, do as skotx said and ask them to set your fans to turn on at a lower than stock temp.

I use 89, 90, 91 for fan1 w/air, fan1 w/out air, fan 2. It makes a huge difference in stop/go traffic and when cooling off after hard runs. I used to see 95C on my commander all the time, now I rarely even see 90C, almost always <90C. I may go even lower once the temps here get warmer, but I have a datalogit and the longest part of the procedure is booting my laptop

K

 

hehe, you are only 1 hour from me. if XS "forgets" to adjust your fan temps, I'll be glad to do it for you. I've got the datalogit.

k

 

Thanks nocab72 I findout about the first or second week of june thats when it should arrive.