I just tried to hook up my DataLogit to my Surface Pro running Windows 8.1 via USB. Got it to communicate, was able to load and read maps but cannot get it to log AFR values. It is capturing data but all I get are zeros for values. I checked my voltage settings in setup and they are the same as what I have in my old laptop, which still works correctly. My old laptop is running XP. Anybody get this to work? Oh yeah, beige box running version 2.29.

 

Just to make sure

1) In your Setup->Auxilary, make sure you have your inputs setup (presumably Delta AN1-AN2 checked, voltage ranges programmed)

2) In Window->Monitor, you have "Aux A/D" checked in the lower right corner. If you don't check that, you'll always log 0's.

 

Want to thank you for your reply. I thought I had everything set correctly but I did not. I had the wrong box checked. Don't know if anyone else might benefit from this, but the suffice is working nicely now with the datalogit. Very handy for logging with lots of battery life. The only thing that sucks now is Excel 2010 will not allow me to smooth my maps by dragging lines when graphing my data. Still have to copy my mapped data into my old laptop and use Excel 2003 to do that. Thanks again for your post.

 

Awesome, glad it worked. Thanks for the update; might be something to look into. My old brick of a laptop is pretty terrible

 

excellent!