Power FC suggested duty cycles for 12psi mods: intake and cb
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: Bay Area
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
suggested duty cycles for 12psi mods: intake and cb
I recently installed a pfc and want to turn up the boost. My mods to airflow are only intake and cb. How safe is this with these mods? I already tuned my maps as suggested at
http://www.clubrx.org/manuals/apexi/...ander_fd3s.pdf
and want to run close to 12 psi (.80-.85 on commander) for both primary and secondary turbos.
After doing much research I have seen many different many different duty cycle numbers, but all for people running more than 12psi. Does anyone have their duty cycles for 12psi?
Thanks
Jason
http://www.clubrx.org/manuals/apexi/...ander_fd3s.pdf
and want to run close to 12 psi (.80-.85 on commander) for both primary and secondary turbos.
After doing much research I have seen many different many different duty cycle numbers, but all for people running more than 12psi. Does anyone have their duty cycles for 12psi?
Thanks
Jason
Thread
Thread Starter
Forum
Replies
Last Post