Power FC Some PFC/datalogit questions
Some PFC/datalogit questions
When I change settings in "Settings #" tab, do I click on update to send to the PFC or "write all"
Also, WOT @ idle knock is 80, is that reasonable?
Thanks
Also, WOT @ idle knock is 80, is that reasonable?
Thanks
Joined: Oct 2001
Posts: 414
Likes: 0
From: South Carolina
dapdas = dumb a** person do a search
But I will give you alittle bit answer.....
If you click update it will upload/change the setting just for the tab you are on
And if you click write all then it will upload all the tab settings
As far as knock goes its really dependant of the car...that maybe normal for your car. As long as you notice a consistant pattern in the knock readings then its usually fine....just make sure you have a good tune! Oh yeah and my knock readings 1 bar = 50 knock / .5 bar = 25 knock....its pretty consistant
But I will give you alittle bit answer.....
If you click update it will upload/change the setting just for the tab you are on
And if you click write all then it will upload all the tab settings
As far as knock goes its really dependant of the car...that maybe normal for your car. As long as you notice a consistant pattern in the knock readings then its usually fine....just make sure you have a good tune! Oh yeah and my knock readings 1 bar = 50 knock / .5 bar = 25 knock....its pretty consistant
That defiintion of DAPDAS is wrong as it was a guess by someone.
But it's meaning is still derogatory. The person being dapdased isn't showing much initiative or intelligence.
But it's meaning is still derogatory. The person being dapdased isn't showing much initiative or intelligence.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




