Power FC Running rich?
#2
Registered Abuser
Join Date: Sep 2001
Location: Louisville, KY
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
What are your mods, and what map are you running?
The easiest way to remove some fuel is via the PIM Volt, as described on page 23-24 of the manual. Lower the 100.0% for whatever RPM range you want (middle of page 24). Be careful if you aren't using a wideband for reference.
-Scott
The easiest way to remove some fuel is via the PIM Volt, as described on page 23-24 of the manual. Lower the 100.0% for whatever RPM range you want (middle of page 24). Be careful if you aren't using a wideband for reference.
-Scott
#3
Chances are that you're running an overly rich map for your mods (i.e. what I'm doing...base mod map w/ only a DP == stinky exhaust). You could always lean it out by getting some more flow mods!
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
jetlude
Single Turbo RX-7's
4
08-18-15 04:53 PM