Power FC reloading a saved "map watch" into DataLogit
08-12-09, 09:14 AM
#1
reloading a saved "map watch" into DataLogit
Is it possible to reload the saved/logged file produced from a "map watch" ?
I've loaded the saved text file into a spreadsheet program like Excel, but it's not very user friendly, and I'd like to copy-n-paste the 20x20 grid of average AFR's.
I tried the "open" command under "map watch" and nothing happens.
Thanks,
:-) neil
I've loaded the saved text file into a spreadsheet program like Excel, but it's not very user friendly, and I'd like to copy-n-paste the 20x20 grid of average AFR's.
I tried the "open" command under "map watch" and nothing happens.
Thanks,
:-) neil
08-12-09, 12:29 PM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
I use Excell to edit my logs, but you have to save them in the original format, not EXCEL.
Normally I edit out the readings before and after the area of tuning. Or if the log includes multiple runs that would overlap, then I seperate them into single runs.
You do not want a combined log where an area might include accel and de-accel through the same cells as this screws up AFRs.
The 202X20 grid of AFRS can be copied and pasted into one of the EXCEL AFR worksheets that have been posted here in the past.
Normally I edit out the readings before and after the area of tuning. Or if the log includes multiple runs that would overlap, then I seperate them into single runs.
You do not want a combined log where an area might include accel and de-accel through the same cells as this screws up AFRs.
The 202X20 grid of AFRS can be copied and pasted into one of the EXCEL AFR worksheets that have been posted here in the past.
08-12-09, 12:51 PM
#3
I use Excell to edit my logs, but you have to save them in the original format, not EXCEL.
Normally I edit out the readings before and after the area of tuning. Or if the log includes multiple runs that would overlap, then I seperate them into single runs.
You do not want a combined log where an area might include accel and de-accel through the same cells as this screws up AFRs.
The 202X20 grid of AFRS can be copied and pasted into one of the EXCEL AFR worksheets that have been posted here in the past.
Normally I edit out the readings before and after the area of tuning. Or if the log includes multiple runs that would overlap, then I seperate them into single runs.
You do not want a combined log where an area might include accel and de-accel through the same cells as this screws up AFRs.
The 202X20 grid of AFRS can be copied and pasted into one of the EXCEL AFR worksheets that have been posted here in the past.
I'll just have to do some more pulls.
Also, while I programmed my Innovate LC-1 to produce a linear voltage curve for AFR between 9-16 (0v-5v), the Datalogit is off by about 3-points compared to display for the LC-1 (which was also programmed to the 9-16 AFR for 0-5VDC).
Do you have any idea if I should "Poly" and if so, what the values for a,b,c should be ?
BTW: how do I subscribe to your tuning notes and offer a donation ?
Thanks,
:-) enil
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM