Power FC Raising PIM voltage
Thread Starter
Joined: Jun 2002
Posts: 3,367
Likes: 86
From: Phoenix, AZ
Raising PIM voltage
Hey guys,
Just a quick question regarding setting PIM voltage. I'm in the normal menu and I see that I can raise my PIM voltage to 103.1 percent in the rpm ranges that I want using the Engine RPM Specific Correction menu, but I'm confused as to the next menu (Pressure Sensor Voltage Selection). Does this menu need to be modified as well to match the settings in my RPM-specific PIM menu?
Thanks in advance,
Tim
Just a quick question regarding setting PIM voltage. I'm in the normal menu and I see that I can raise my PIM voltage to 103.1 percent in the rpm ranges that I want using the Engine RPM Specific Correction menu, but I'm confused as to the next menu (Pressure Sensor Voltage Selection). Does this menu need to be modified as well to match the settings in my RPM-specific PIM menu?
Thanks in advance,
Tim
PIM RPM allows gross across the 400(20X20) cell map fuel changes by rpms(columns,N).
PIM PRESSURE allows gross across the 400(20X20) cell map fuel changes by boost pressure (rows,P) based upon the map sensor output voltages.
4.5v ~ 14.3 psi
4.0v ~ 10.5 psi
3.5v ~ 6.5 psi
3.0v ~ 2.6 psi
PIM PRESSURE allows gross across the 400(20X20) cell map fuel changes by boost pressure (rows,P) based upon the map sensor output voltages.
4.5v ~ 14.3 psi
4.0v ~ 10.5 psi
3.5v ~ 6.5 psi
3.0v ~ 2.6 psi
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
