I'm 3 for 3 on buying used stuff. My wife (rev 1.0 ) bought me a used pfc&commander and an used Greddy SMIC for Christmas, plus I recently bought a used bonez hiflow.

Yesterday I installed the SMIC and just finished the install of the pfc. From the vacuum I gathered when installing (@ 465mmgh) I think everything on the IC install is tight.

While I haven't driven it since the installs (rain), I did initialize the pfc on my car. The pfc version I have is 5.07 which I haven't seen on the board, nonetheless, it installed fine.

It took about 10 minutes for it to adjust from 2300 rpms down to 830's. Immediately, I felt smoother, silkier, revving.

Once it got to 830 I turned on the AC and the idle picked up rather slowly to 1300 then went back down (again slowly). I turned on the lights and the same thing happened. I don't mind the idle increase, but it does seem a bit slow. Is this normal?

Also the car seems to now re-learn each time. Is this a AWS-like function within the pfc?

And finally, the pfc was initially modified by SR Motorsports for, coincidentally, all the same mods. I eventually plan to get it tuned a bit better at RP.

Any goods words of advice are welcome!

Thanks.