Power FC Primary and Secondary injector setting and lagtime
Thread Starter
Junior Member
Joined: Oct 2010
Posts: 47
Likes: 0
From: ita
Primary and Secondary injector setting and lagtime
Rx7 FC S5 TII with Apexi PFC AP eng
I this days should I install the APEXI and injectors.
I'll change the secondary injectors with 650cc by Sard( I know it's a low change)
I need change the setting with the controller.
When start the PFC I saw all 100% and correction +0.00
now:
The lag time for the 650cc Sard Hig Imp is 1.5ms(from factory data,and RDHjapan where I bought)
prim: 550 lag time 0.73
second:650 lag time 1.5
1.5-0.73 = 0.77 this is the correction for the secondary
The setting will be:
It's right?
I don't need change anything from the primary?
I don't need change the injector duty?
I this days should I install the APEXI and injectors.
I'll change the secondary injectors with 650cc by Sard( I know it's a low change)
I need change the setting with the controller.
When start the PFC I saw all 100% and correction +0.00
now:
The lag time for the 650cc Sard Hig Imp is 1.5ms(from factory data,and RDHjapan where I bought)
prim: 550 lag time 0.73
second:650 lag time 1.5
1.5-0.73 = 0.77 this is the correction for the secondary
The setting will be:
It's right?
I don't need change anything from the primary?
I don't need change the injector duty?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM