Will there be more PowerFC maps posted on the PowerFC Maps section?
I think it was last updated like july 2001.

Or is there any good website/forum with PowerFC maps posted? I would like to get try different maps...

 

Don't change maps unless you have a datalogit or you have a very strong understanding of the PFC. I would hate to see someone blow their motor. THe commander does not allow you to change the base fuel map.
John

 

I would get a map that has your mods or close or else stay base until you can do some accurate A/F tuning.

 

I just got a PowerFC. It is used. It has a different map for a car that has totally different mods than mine. That is why I asked the question above.
Are the base map good in the instruction+maps section?
I have the following mods now with stock ECU. I am waiting for my wideband install before going to PowerFC.

Mods:
- k&n drop in filter
- bnr stage1 turbo with ported wastegate
- downpipe
- high-flow cat
- N1 Duals with both silencer on(to limit flow)
- HomeDepot wastegate and precontrol valves (tuned to 10-7-10, I think the ported wastegate made is lower boost).

Any help/insight is appreciated.
Reza

 

Get a Datalogit. It should interface in with your wideband (whose is it?) an allow you to throw maps onto your car, datalog, and access portions of the PFC programming that you normally would not.

Get it, you won't be sorry. Edit: plus there are alot more maps on the Datalogit yahoo groups in DAT format (for the Datalogit, of course) that you'll be able to look at.

 

hey badog you seem to be very knowledgeable can i ask you something about the pfc if i initialize the settings will it clear all data or will it reset to what it was originaly programmed to? oh by the way imppresive 1/4 times

 

So if the map is based on the same mods, is it ok to start with that?

 

Yes, but again BE CAREFUL and study the map. Until you dyno with wideband you will not know for sure how that map fits your car.

2 cars witht he exact same mods can have some different settings....remember every engine is unique in some way and so will the maps.

Other maps are guidelines only to get you going.

 

ok, thanks...I should head to the closest dyno and get an idea of where I am starting...

 

What is the site for the datalogit? Where do you sign up?
Thanks for the help!

 

http://groups.yahoo.com/group/Datalogit-FD3S/ but you need to be a member to access it and membership is by invitation only. If you own a Datalogit there should have been instructions on who to email to get invited.

 

how long does it take to get invited? I sent in my info yesterday...

 

You'll probably here back from them late tonight, don't forget they're like 12 hours behind us over in Oz.

 

Do you have a datalogit?? If not you prob won't be invited
J

 

I have it (just got it yesterday), I just sent the email with numbers yesterday as well.

 

should be soon then...
J