When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi just got my rx7 fd running but it really needs a tune I’m currently on power fc management if anyone has a base map tune they could send me just to move the car around I would appreciate it…
You are looking for a base map? You can reinitialize the PFC and it will go back to a base map. I am assuming that with the mods listed, you do not have the stock airpump, so you would disable the 02 Feedback. You would also need to turn off the sequential turbo control eventually. I would also suggest setting the injector data if you know which injectors you have. This should hopefully allow you to start and just move the car around, but I would not drive the car until you can get a real tune.
JUST to move around, it will run on the pfc base map just fine. You don't need anything for that especially since you have the stock primaries. Do not attempt to drive on it but you can absolutely navigate a driveway or a parking lot.
Honestly I think this would be a really difficult task to remote tune with a PowerFC. Did you build the car or purchase as it is? Do you know all of the details of the build--what injectors were used, have a wideband installed and a datalogit?
Honestly I think this would be a really difficult task to remote tune with a PowerFC. Did you build the car or purchase as it is? Do you know all of the details of the build--what injectors were used, have a wideband installed and a datalogit?
I built the car sorry my first rotary I worked on so really new to all of this.. and the injectors are bosch bought them through irperformance and currently running a aem wideband and got the datalogit from rx7.com
Other might not like this suggestion, but given how limited you are, I would suggest you take a look at FCTweak. If you have a wideband/datalogit and they are setup correctly, FCtweak could take your base map, apply modifications to it based on your modifications, then you could add fuel into the boost cells to ensure that its running rich. You could then use the datalog to log you driving without boost to update your map. Then go back and slowly introduce boost and let the software build you a custom map.
Xavier Borg is the name of the person who has built the software. He also helped me directly with my map as well. I would send him an email to see if he would help. ingxborg@gmail.com. Check out FC Tweak on Facebook. I have it and use it on my rx7 frequently. Its an amazing piece of software.
You will have to know everything that is done with the car and if you have the injector information, you can set the injector lag tables properly.
