Power FC Power FC Idle Problems
Full Member
Joined: Feb 2001
Posts: 59
Likes: 0
From: Bay Area
ditto... it is much better than when i first installed the pfc... not it is just once in a long while... it seams like i can trigger it but taping the gas and leting off quikly.... them my idle will start to bounce.... till i give it gas for about 15seconds and then let off...
-m
-m
WTF is wrong with it now?
Joined: Oct 2001
Posts: 1,492
Likes: 0
From: London, ON
My car ran fine from the first time I installed the PFC. This morning on the way to work I turned up the boost a bit and when I got off the highway I had this bouncing idle from 800 - 1800 RPM. I had blown the hose off the PVC valve. Stuck it back on and idle was fine. Now where did I leave those zip ties?
Junior Member
Joined: May 2001
Posts: 17
Likes: 0
From: Cincinnati, Ohio USA
BTW, PFC-powered RX7's aren't the only ones that have this problem. I have an MR2 with PFC and have the same problem, as well as the other PFC-powered MR2's. I'll see if some of your ideas work on our cars too.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
