Hey everyone,
I was hoping a few power fc gurus could possibly take a quick look at my current map. I have been trying to learn the power fc over the passed few years, but just recently purchased my fc-hako/ datalogit. I own a 93 fd with following mods currently: streetport, AEM Water/meth, 850prim/sec, borg warner s300 hybrid single, power fc, blitz fmic, blitz EBC, NGK BR10EIX Leading/trailing, B&M new volt ignition amplifier, Denso supra fuel pump, HKS External wastegate, Greddy Bov. I am still currently running the stock 2 bar map sensor. I was hoping to get a bit of feedback regarding my map, I currently have not been able to reach over 1.03bar on commander which usually happens in a 3rd or 4th gear pull. I do realize the 2 bar map sensor limits the tune to 17psi, unfortunatly I have never been able to reach over the 1.03. I have looked and see the pim scale is only showing to 21000 which is roughly 15ish? Aside from that I am sort of a noob when it comes to tuning the base map and igl/igl and was hoping for a few hints as my nearest tuner is over 2 hours away :/

1.03barMap.rar download - 2shared

Thanks alot for your time guys!

 

Sorry I tried to post a direct link, for some reason its not working that way. if you hit the bottom blue download button it will work fine

 

Running 850/850 is a waste of time and obsolete way to go. Not enough fuel to make any real power. I had to go from 550/1200 to 550/1600 do go over 14 psi boost.

The stock map sensor is good only for 16 psi if you want a safety row.

You need to join the private PFC/DL+ tuning group.
PM arghx.

 

Thx for the input ya ill join the group once I have 50$ joinup fee to spare, have a wedding coming up so its a bit tight atm at full boost im only running at 65% inj duty which I think would still give me some leeway in being able to hit that 16psi with the current setup.