dblboinger

iTrader: (3)

I need someone with a Power FC Commander to remove the back cover and tell me the order of the wires that connect to the pc board. I know pin 4 is yellow and pin 5 is green, but the other 3 are all broken at the pcb. C'mon guys, help me out.

Coverhag

iTrader: (15)

I took mine apart today to repair a broken brown wire. And voila ! The commander works again !
While in there I noted the colors for you:

1 Brown
2 Red
3 Orange
4 Yellow
5 Green

Hope this helps.

dblboinger

iTrader: (3)

Thanks Coverhag, it's much appreciated that SOMEBODY took the time to reply. 12 days. I called Apexi about 10 days ago and got the info. Standard resistor color-code. Imagine that. lol

Anyway, while I had it apart I found the display and the controls are actually on 2 seperate ckt boards, so that gave me an idea. I have a Banzai Racing Commander holder, but it just looks out of place to me. It doesn't hold the Commander at the proper angle and it's too far away for my eyes to focus on quickly. So I bought a used Commander and I'm going to seperate the display from the control buttons and mount the display either on top of the steering column or underneath my stereo. (steering column is my first choice) Then I'm going to flush mount the control buttons in place of my ash-tray. If I screw it up I still have a good Commander to use and if it works out I'll just sell the 2nd one on this forum...or ebay...or Craigs List. Now all I need is the top portion of the steering column bezel.