When using a PFC with a manual boost controller on a single turbo setup, can you use the peak and hold feature from the pfc?

does the primary solenoid connect to the single turbo setup or is it unplugged?

(the electronic peak and hold feature that is highlighted on the pfc next to the actual/current reading from the monitor mode.)

 

(1) The monitor peak and hold is only a form of data logging, not a control for anything.

(2) Do not know as I never used the PFC for boost control.

 

Right, I am curious to know if pfc would tell me the amount of boost that i ran from the current run. after the run, not during the run.. sorry, don't know how to make it more clear..

 

If it couldn't, the PFC wouldn't be a very good ecu...considering it is just displaying the reading from the MAP sensor!

Why are you to trying to ghetto-rig something? Get a proper electronic boost controller.

 

If i go single turbo, i'd like to have the pfc monitor the peak boost

not ghetto rigging anything, just want some info..
i don't want to use the apex solenoid because i prefer using manual boost controller, but i'd like to have pfc register it for me

but you've just answered my question, boost pressure is calculated from the map.