Power FC pfc and avcr
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: toronto
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
pfc and avcr
I had my avcr on my stock ecu last year fine but on my pfc it isn't working. I went single turbo and changed all the lines and ports on boost solinoid the way the manual says but no luck. Do I have to change any of the wires on the avcr connections? Could it be a wastegate issue?
#2
Resident Retard
Join Date: Apr 2001
Location: Cockaigne
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
my understanding is that the minimum boost you can run is controlled by the wastegate spring, so even if you set your limit at 10 psi, if you have a 14 psi spring then you will run 14 psi.
Thread
Thread Starter
Forum
Replies
Last Post