Alright, I've got a 93 touring w/ apexi intake JDM downpipe and dp back exhaust. PFC gets all data init so far everytime I have to start the car. I have questions about the four wires, as mine in the locations specified are NOT the same color on the 26 pin connector. The one on the bottom 6 in was missing already (assuming the previous owner), as well as the one on bottom 3 from the right. BUT, the main question is the top wire 6 in is brown with silver dots. tried cutting this wire, but car does not run properly afterward. Also, my fuel thermosensor is highlighted in reverse, running at 4.98v. Is this normal, or does it need replacing.