anyone have/can make me a basemap for my motor for breakin? 1000cc primaries, 1600 secondaries, streetported, hks ignition, r85 single turbo, greddy 2 row ic, PFC, Koyo rad, and all the goodies. Just need to have a breakin map, no boost but a map that extends into the 5k range would be great.

 

Other than injector settings, I think you would be fine just running the stock PFC map. Good luck getting a smooth and good idle with 1000cc primaries.

 

i can live without a grade a++++++++++ idle, i dont really care, most of the kids around here couldnt even tell thats what its supposed to sound like and probably would try to tell me that my car is "cammed" cause they are idiots.

I know its not gonna be a perfect idle but I already thought about that. Just the map in there currently is hardcore rich, almost to the point my eyes burn from so much excess fuel and i shoot flames at idle sometimes.

 

With 1000cc primaries you might be able to tune idle and cruise with the comander and a wideband mounted in the DP. If not, you will also need a datalogit.

 

I thought the PFC basemap for stock twin turbo only, cuz i spoke to chunk in rotaryextreme.

I have 550cc and 1300cc, and i do need a base map too. The car is running like crap.

Do you have problem in idle ??
My IgnT Ld and IgnT Td are negative, meanwhile the engine is shaking like hell.
When the car is in idle, the VAC. is about 10; when i step on the gas a little bit, it goes down to about 20 ( i m using Autometer), in fact, i can smell a lot of gas from the exhaust.

Do you have the same problem above ???