Power FC Which maps to use?
10-18-01, 06:33 PM
#1
Retired RX7 mechanic
Thread Starter
Join Date: Feb 2001
Location: Long Island, NY
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Which maps to use?
Which maps are closest to my mods:
M2 intake
PFS SMIC
Full exhaust
HKS Twin power
1300cc sec
PFC
With Tims maps I noticed some Boost creep....I have them in there now.....But looking for a different one to try out...
M2 intake
PFS SMIC
Full exhaust
HKS Twin power
1300cc sec
PFC
With Tims maps I noticed some Boost creep....I have them in there now.....But looking for a different one to try out...
10-19-01, 08:17 AM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Maps can only cause boost creep if they produce more power than the previously used set. Boost creep is caused by the WG being too small for the power produced, or the actuator being defective or placing too much tension on the WG.
For maps: you go by the engine mods that affect the breathing and exhaust efficiency of the engine. You do not include injector size since the PFC has a seperate map to correct for that. Of course some fine tuning is always needed.
For maps: you go by the engine mods that affect the breathing and exhaust efficiency of the engine. You do not include injector size since the PFC has a seperate map to correct for that. Of course some fine tuning is always needed.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM
